Paper
10 May 2019 Application of region of interest CT in analysis of CMC plate-like component
Bo Ao, Jingwen Wu, Guanhua Wu , Wei Wu
Author Affiliations +
Proceedings Volume 11068, Second Symposium on Novel Technology of X-Ray Imaging; 110682N (2019) https://doi.org/10.1117/12.2524755
Event: Second Symposium on Novel Technology of X-Ray Imaging, 2018, Hefei, China
Abstract
Aiming at the three-dimensional imaging of ceramic matrix composite (CMC) plate-like component, and the higher resolution imaging requirement of the local region of interest (ROI) in practical engineering applications, imaging experiment of CMC plate-like component was performed by the ROI computed tomography(CT), the resolution of CT imaging reached 28.4 microns, and three-dimensional(3D) imaging of the ROI in CMC plate-like component was realized. The characteristics of pores and typical weaving defects were analyzed from the three-dimensional structure, the three-dimensional morphology of internal pores and typical weaving defects were extracted and visualized respectively. The results show that the region of interest CT can meet the requirements of three-dimensional imaging of focus area of CMC plate-like component, and the 3D morphology, fiber weaving, pores and porosity of CMC plate-like component can be characterized, the porosity of ROI is about 13.23%.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bo Ao, Jingwen Wu, Guanhua Wu , and Wei Wu "Application of region of interest CT in analysis of CMC plate-like component", Proc. SPIE 11068, Second Symposium on Novel Technology of X-Ray Imaging, 110682N (10 May 2019); https://doi.org/10.1117/12.2524755
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computed tomography

3D image processing

X-ray computed tomography

Image resolution

Composites

Visualization

Ceramics

Back to Top