Paper
2 December 1993 Infrared technique: heat transfer measurement
Thomas C. Gruber Jr., Robert H. Page
Author Affiliations +
Abstract
Impinging jets are used for heat and mass transfer in some industries. Previous impinging jet studies used thermocouples or liquid crystals to determine convection coefficients. These methods have inaccuracies that can be avoided with an infrared image temperature measurement. For this research, an infrared camera with a resolution of 0.025 degree(s)C was used to store images containing 52785 temperatures. The camera was checked for accuracy with a thermometer calibrated with a NIST standard. A facility for measuring surface heat transfer coefficients due to an impinging jet was developed. The infrared images obtained with the facility were used to identify impingement flow characteristics and to calculate local convection coefficients for in-line and radial jets. The results include photographs and convection coefficient graphs.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas C. Gruber Jr. and Robert H. Page "Infrared technique: heat transfer measurement", Proc. SPIE 2005, Optical Diagnostics in Fluid and Thermal Flow, (2 December 1993); https://doi.org/10.1117/12.163706
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Convection

Cameras

Temperature metrology

Infrared radiation

Infrared cameras

Infrared imaging

Liquid crystals

RELATED CONTENT

Quantifying surface layer moisture flux from MWIR imagery
Proceedings of SPIE (October 04 2022)
Thermographic measurements on plant leaves
Proceedings of SPIE (March 15 2002)
Benefits of IR/visible fusion
Proceedings of SPIE (April 09 2007)
Progress in thermosonic crack detection
Proceedings of SPIE (March 23 2001)

Back to Top