Paper
13 November 1996 Localization of structural flaws from vibrational analysis
Allen M. Flusberg, T. Luongo, A. de Mesquita
Author Affiliations +
Abstract
A new method to detect and localize structural flaws, mode signature analysis, has been developed and demonstrated on a large realistic model bridge. The presence and location of flaws are detected by analyzing the vibrational response of the structure at a single, fixed point to an impulse excitation at a different fixed point. The localization method has successfully pinpointed a defect with a resolution of approximately 4 cm when both the impulse- excitation source and the point at which the vibration is monitored are located several tens of cm away from the defect. The detection method has been demonstrated by 1) contact measurements made by an accelerometer mounted on the structure and 2) remotely, from the time-dependent Doppler shift of a laser beam reflected from the structure. After the accelerometer signal, proportional to acceleration, is integrated to produce a signal proportional to velocity, it is found to be essentially identical to the remotely observed laser-vibrometer signal. Data analysis illustrates the tradeoff between maximizing the probability that an existing flaw is detected and minimizing the probability that a structure that is in good condition is misdiagnosed as faulty.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Allen M. Flusberg, T. Luongo, and A. de Mesquita "Localization of structural flaws from vibrational analysis", Proc. SPIE 2946, Nondestructive Evaluation of Bridges and Highways, (13 November 1996); https://doi.org/10.1117/12.259144
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bridges

Fourier transforms

Analytical research

Doppler effect

Information operations

Inspection

Velocity measurements

Back to Top