Paper
9 December 1999 Inherently temperature-stable Bi12TiO20-based fiber voltage sensor
Valery N. Filippov, Vadim V. Makarov, Andrey N. Starodumov, Yuri O. Barmenkov, Luis Efrain Regalado
Author Affiliations +
Abstract
The inherent temperature stability of a fiber voltage sensor is far from industrial requirements. Usually, a special channel for a temperature control is needed. Temperature- dependent birefringence of optical elements, such as a quarter-wave plate and a sensitive crystal, is the main source of temperature-induced drift of sensor parameters. To solve this problem we used a special back reflecting prism as a phase-retarding element, BTO crystal as a sensitive element, and a double-pass scheme. The double-pass scheme enables to diminish the negative role of the optical activity in the crystal, to increase an interaction length and, thus, to enhance the sensitivity of the sensor. The special back reflecting prism demonstrates temperature stability more than 20 times better, than a zero-order quartz quarter wave plate. This permits to decrease the temperature-induced drift of sensitivity. The sensor demonstrates temperature stability of (1.5% from -20 degrees Celsius to 60 degrees Celsius) and sensitivity of 0.145% per 1 V rms at 850 nm without using an additional temperature control channel.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valery N. Filippov, Vadim V. Makarov, Andrey N. Starodumov, Yuri O. Barmenkov, and Luis Efrain Regalado "Inherently temperature-stable Bi12TiO20-based fiber voltage sensor", Proc. SPIE 3860, Fiber Optic Sensor Technology and Applications, (9 December 1999); https://doi.org/10.1117/12.373001
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Crystals

Prisms

Fiber optics sensors

Phase shifts

Temperature metrology

Polarization

Back to Top