Paper
16 February 2005 Self-priming and bubble tolerant micropump
Guolin Xu, Francis E. H. Tay, Ciprian Iliescu, Vincent Luar
Author Affiliations +
Proceedings Volume 5651, Biomedical Applications of Micro- and Nanoengineering II; (2005) https://doi.org/10.1117/12.581965
Event: Smart Materials, Nano-, and Micro-Smart Systems, 2004, Sydney, Australia
Abstract
A self-priming and bubble tolerant planar micro-pump, which is fabricated by traditional technology, has been demonstrated and characterized. The micro-pump has a simple three-layered structure. Its two pump housings are made of polycarbonate and they are fabricated by computer numerical control (CNC) machine. The actuation membrane, which acts as the inlet and outlet valve membrane is cast in polydimethylsiloxane (PDMS). Using the PDMS membrane to act as the actuation membrane and valve membrane, we have solved the problem of sealing and poor compression ratio that most silicon based micro-pump faced. From the model of the membrane stroke volume, the flow rate of the pump is insensitive to the pump output pressure, and the output flow rate is linearly varying with actuating frequency. Flow rate up to 1000 ul/min of liquid has been achieved. More than 2m pump-head has been obtained when using water as the pumping medium. The robustness of the pump makes it suitable for disposable applications like biochip system.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guolin Xu, Francis E. H. Tay, Ciprian Iliescu, and Vincent Luar "Self-priming and bubble tolerant micropump", Proc. SPIE 5651, Biomedical Applications of Micro- and Nanoengineering II, (16 February 2005); https://doi.org/10.1117/12.581965
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Prototyping

Silicon

Head

Microfluidics

Biotechnology

Liquids

RELATED CONTENT


Back to Top