Condition monitoring of concrete structures using wireless sensor networks and MEMS

Christian U. Grosse; Steven D. Glaser; Markus Krüger

doi:10.1117/12.657303

11 April 2006 Condition monitoring of concrete structures using wireless sensor networks and MEMS

Christian U. Grosse, Steven D. Glaser, Markus Krüger

Proceedings Volume 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems; 61741C (2006) https://doi.org/10.1117/12.657303
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

The inspection of building structures, especially bridges, is currently made by visual inspection. The few non-visual methodologies make use of wired sensor networks, which are relatively expensive, vulnerable to damage, and time consuming to install. Systems based on wireless sensor networks should be both cost efficient and easy to install, scalable and adaptive to different type of structures. Acoustic emission techniques are an additional monitoring method to investigate the status of a bridge or some of its components. It has the potential to detect defects in terms of cracks propagating during the routine use of structures. However, acoustic emissions recording and analysis techniques need powerful algorithms to handle and reduce the immense amount of data generated. These algorithms are developed on the basis of neural network techniques and - regarding localization of defects - by array techniques. Sensors with low price are essential for such monitoring systems to be accepted. Although the development costs of such a system are relatively high, the target price for the entire monitoring system will be several thousands Euro, depending on the size of the structure and the number of sensors necessary to cover the most important parts of the structure. Micro-Electro-Mechanical-Systems and hybrid sensors form the heart of Motes (network nodes). The network combined multi-hop data transmission techniques with efficient data pre-processing in the nodes. Using this technique, monitoring of large structures in civil engineering becomes very efficient including the sensing of temperature, moisture, strain and other data continuously. In this paper, the basic principles of a wireless monitoring system equipped with MEMS sensors is presented along with a first prototype. The authors work on details of network configuration, power consumption, data acquisition and data aggregation, signal analysis and data reduction is presented.

Citation Download Citation

Christian U. Grosse, Steven D. Glaser, and Markus Krüger "Condition monitoring of concrete structures using wireless sensor networks and MEMS", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 61741C (11 April 2006); https://doi.org/10.1117/12.657303

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available