Paper
31 May 2006 Construction of sealed copper bromide (CuBr) laser and study of frequency variations on the output power of laser
H. Sagafifar, S. Zamiry, M. Zamani, A. Seirafiyan, R. Kazemi
Author Affiliations +
Proceedings Volume 6263, Atomic and Molecular Pulsed Lasers VI; 62630A (2006) https://doi.org/10.1117/12.677394
Event: Atomic and Molecular Pulsed Lasers VI, 2005, Tomsk, Russian Federation
Abstract
A sealed CuBr laser was designed and constructed. He and Ne were used as buffer gases; it is found that, under the same experimental conditions, the output power of laser increased significantly using Ne than He. We have also added a small amount of hydrogen in the tube, which generated excitation Pulses from 15 kHz. The influence of pulse repetition frequency (PRY) on the laser output power was studied. We have varied the PRF between 10 to 30 kHz by a control circuit and laser output power curve versus frequency has been achieved. The optimum frequency was obtained for maximum laser power. A minimum was obtained on the output power of laser versus PRF which can be attributed to acoustic frequencies of CuBr container structure. Maximum efficiency of this laser was about 0.8%.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Sagafifar, S. Zamiry, M. Zamani, A. Seirafiyan, and R. Kazemi "Construction of sealed copper bromide (CuBr) laser and study of frequency variations on the output power of laser", Proc. SPIE 6263, Atomic and Molecular Pulsed Lasers VI, 62630A (31 May 2006); https://doi.org/10.1117/12.677394
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

Neon

Copper vapor lasers

Pulsed laser operation

Acoustics

Gases

Capacitors

Back to Top