Paper
13 October 2008 Optical design for a LCD projection lens
Author Affiliations +
Abstract
The optical design of projection objectives is a key to the LCD projection technology, which will have a great impact on the quality of projection image. The method of the design for the LCD projection objective is very close to that for photographic lens. In this paper, a LCD projection objective is designed. Based on the inverse telephoto objective, the initial optical structure is obtained through complication so that the seven primary aberrations of the initial system can be corrected. The optical design software ZEMAX is employed to have the initial system optimized. The optimization result meets the technique requirements: the effective focal length 50mm, F/6, the full field of view ±20°, distortion greater than 0.1% and MTF above 0.1 at 40lp/mm.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qinhua Huang, Haobo Cheng, and Yongtian Wang "Optical design for a LCD projection lens", Proc. SPIE 7129, Seventh International Symposium on Instrumentation and Control Technology: Optoelectronic Technology and Instruments, Control Theory and Automation, and Space Exploration, 71290J (13 October 2008); https://doi.org/10.1117/12.807628
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Distortion

LCD projection

Lens design

Image quality

LCDs

Objectives

Back to Top