In the course of assessing OPC compact modeling capabilities and future requirements, we chose to investigate the interface between CD-SEM metrology methods and OPC modeling in some detail. Two linked observations motivated our study:
1) OPC modeling is, in principle, agnostic of metrology methods and best practice implementation.
2) Metrology teams across the industry use a wide variety of equipment, hardware settings, and image/data analysis methods to generate the large volumes of CD-SEM measurement data that are required for OPC in advanced technology nodes.
Initial analyses led to the conclusion that many independent best practice metrology choices based on systematic study as well as accumulated institutional knowledge and experience can be reasonably made. Furthermore, these choices can result in substantial variations in measurement of otherwise identical model calibration and verification patterns.
We will describe several experimental 2D test cases (i.e., metal, via/cut layers) that examine how systematic changes in metrology practice impact both the metrology data itself and the resulting full chip compact model behavior. Assessment of specific methodology choices will include:
• CD-SEM hardware configurations and settings: these may range from SEM beam conditions (voltage, current, etc.,) to magnification, to frame integration optimizations that balance signal-to-noise vs. resist damage.
• Image and measurement optimization: these may include choice of smoothing filters for noise suppression, threshold settings, etc.
• Pattern measurement methodologies: these may include sampling strategies, CD- and contour- based approaches, and various strategies to optimize the measurement of complex 2D shapes.
In addition, we will present conceptual frameworks and experimental methods that allow practitioners of OPC metrology to assess impacts of metrology best practice choices on model behavior.
Finally, we will also assess requirements posed by node scaling on OPC model accuracy, and evaluate potential consequences for CD-SEM metrology capabilities and practices.
Thomas I. Wallow, Chen Zhang, Anita Fumar-Pici, Jun Chen, Bart Laenens, Christopher A. Spence, David Rio, Paul van Adrichem, Harm Dillen, Jing Wang, Peng-Cheng Yang, Werner Gillijns, Patrick Jaenen, Frieda van Roey, Jeroen van de Kerkhove, and Sergey Babin, "CD-SEM metrology and OPC modeling for 2D patterning in advanced technology nodes (Conference Presentation)," Proc. SPIE 10145, Metrology, Inspection, and Process Control for Microlithography XXXI, 101451Q (Presented at SPIE Advanced Lithography: March 02, 2017; Published: 28 April 2017); https://doi.org/10.1117/12.2260443.5402356019001.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 14,000 conference presentations, including many plenary and keynote presentations.
Study of self-shadowing effect as a simple means to realize nanostructured thin films and layers with special attentions to birefringent obliquely deposited thin films and photo-luminescent porous silicon