In this study, we evaluated the mechanical properties of printed structures with respect to the printing orientation for "SWIM-ER". The fracture surface of the 3D modeled object of the gel does not break along the stacked line, and the maximum stress at that time is the breaking strength. Moreover, the dependency in the stacking direction is weak in the 3D model of the gel. The gel printed at high speed scan showed lower elastic modulus and higher moisture content than gel printed at low speed scan. We discussed about crosslinking density calculated based on the compressive elastic modulus and moisture content, respectively. It was found that gels having different crosslinking density can be formed by the scanning speed of UV laser. In addition, we made a prototype of a gel finger model with different mechanical properties within the model.
Azusa Saito, Takafumi Ota, Taishi Tase, Kyuichiro Takamatsu, Masaru Kawakami, and Hidemitsu Furukawa, "Design of the mechanical properties of the gel by the 3D gel printer "SWIM-ER"," Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 101671E (Presented at SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring: March 29, 2017; Published: 17 April 2017); https://doi.org/10.1117/12.2261705.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 12,000 conference presentations, including many plenary and keynote presentations.