In this paper, the wave field has been computationally modeled in the anisotropic plate. The Christoffel’s equation is solved to calculate the phase velocity of different wavefronts present at any point in the problem geometry. The calculated phase velocity is then used to develop the Green’s function. The anisotropic Green’s function was developed by implementing Radon transform and Spectral theorem into governing elastodynamic equation. Then the wave behavior in the anisotropic plate is simulated and studied by instigating the calculated Green’s function into the computational non-destructive evaluation (CNDE) technique, distributed point source method (DPSM). The wave propagation with different actuation angles for the transducer are simulated in plate with various forms of anisotropy such as transversely isotropic, orthotropic and, monoclinic plate. The study was performed such that the different anisotropic wave behaviors can be understood to the maximum extent in simplest form. The actuation angle used is normal incidence angle from the perpendicular to problem geometry surface with the actuation frequency of 1MHz. MATLAB is used for coding and simulation.
S. Shrestha and S. Banerjee, "Computational wave field modeling in anisotropic plate," Proc. SPIE 10170, Health Monitoring of Structural and Biological Systems 2017, 101700Q (Presented at SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring: March 27, 2017; Published: 5 April 2017); https://doi.org/10.1117/12.2263384.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 14,000 conference presentations, including many plenary and keynote presentations.
Study of self-shadowing effect as a simple means to realize nanostructured thin films and layers with special attentions to birefringent obliquely deposited thin films and photo-luminescent porous silicon