From Event: SPIE Commercial + Scientific Sensing and Imaging, 2017
Fiber Optic Distributed Acoustic Sensing (DAS) and Distributed Strain Sensing (DSS) systems have widespread use for
asset and security monitoring. The acoustic signal from such sources as intruders, vehicles, or gunfire must be coupled
from the earth to an optical fiber which is then interrogated by DAS system technology. Because the optical fiber is the
sensing element, and because the cable is required to mediate the interaction of the fiber and its environment, the
selection of the optical fiber, cable design, and deployment conditions are critical to the performance of the system.
Cable designs specifically created for sensing are shown to achieve 20 dB higher signal-to-noise than standard telecom
designs, which correspond to an enhanced sensing range of more than 30 meters. In addition, directly burying the
sensing cable in the ground leads to 15 dB higher sensitivity than installing it in a duct. In many cases, standard cables
for telecommunications applications are designed to isolate and protect the fibers from the external environment;
therefore a cable designed for sensing applications and deployed specifically with this in mind leads to the highest
sensitivity with the largest sensing range.
Riley S. Freeland, Bruce Chow, John Williams, and Alastair Godfrey, "Relative acoustic sensitivity of standard telecom and specialty optical fiber cables for distributed sensing," Proc. SPIE 10208, Fiber Optic Sensors and Applications XIV, 102080M (Presented at SPIE Commercial + Scientific Sensing and Imaging: April 12, 2017; Published: 27 April 2017); https://doi.org/10.1117/12.2263586.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 14,000 conference presentations, including many plenary and keynote presentations.
Study of self-shadowing effect as a simple means to realize nanostructured thin films and layers with special attentions to birefringent obliquely deposited thin films and photo-luminescent porous silicon