From Event: SPIE Commercial + Scientific Sensing and Imaging, 2017
Pulsed Thermography (PT) is one of the most common methods in Active Thermography procedures of the Thermography for NDT & E (Nondestructive Testing & Evaluation), due to the rapidity and convenience of this inspection technique. Flashes or lamps are often used to heat the samples in the traditional PT. This paper mainly explores exactly the opposite external stimulation in IR Thermography: cooling instead of heating. A steel sample with flat-bottom holes of different depths and sizes has been tested. Liquid nitrogen (LN2) is sprinkled on the surface of the specimen and the whole process is captured by a thermal camera. To obtain a good comparison, two other classic NDT techniques, Pulsed Thermography and Lock-In Thermography, are also employed. In particular, the Lock-in method is implemented with three different frequencies. In the image processing procedure, the Principal Component Thermography (PCT) method has been performed on all thermal images. For Lock-In results, both Phase and Amplitude images are generated by Fast Fourier Transform (FFT). Results show that all techniques presented part of the defects while the LN2 technique displays the flaws only at the beginning of the test. Moreover, a binary threshold post-processing is applied to the thermal images, and by comparing these images to a binary map of the location of the defects, the corresponding Receiver Operating Characteristic (ROC) curves are established and discussed. A comparison of the results indicates that the better ROC curve is obtained using the Flash technique with PCT processing method.
L. Lei, G. Ferrarini, A. Bortolin, G. Cadelano, P. Bison, and X. Maldague, "Liquid nitrogen cooling in IR thermography applied to steel specimen," Proc. SPIE 10214, Thermosense: Thermal Infrared Applications XXXIX, 102140T (Presented at SPIE Commercial + Scientific Sensing and Imaging: April 12, 2017; Published: 5 May 2017); https://doi.org/10.1117/12.2262208.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 14,000 conference presentations, including many plenary and keynote presentations.