From Event: SPIE Commercial + Scientific Sensing and Imaging, 2017
Thermal Barrier Coatings are used to protect the materials from severe temperature and chemical environments. In particular, these materials are used in the engineering fields where high temperatures, corrosive environments and high mechanical stress are required. Defects present between substrate material and coating, as detachments may cause the break of coating and the consequent possibility to exposure the substrate material to the environment conditions. The capability to detect the defect zones with non-destructive techniques could allow the maintenance of coated components with great advantages in terms of costs and prediction of fatigue life.
In this work, two different heat sources and two different thermographic techniques have been used to detect the adhesion defects among the base material and the coating. Moreover, an empirical thermographic method has been developed to evaluate the thickness of the thermal coating and to discriminate between an unevenness of the thickness and a defect zone. The study has been conducted on circular steel specimens with simulated adhesion defect and on specimens prepared with different thicknesses of thermal barrier coating.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Davide Palumbo, Rosanna Tamborrino, and Umberto Galietti, "Coating defect evaluation based on stimulated thermography," Proc. SPIE 10214, Thermosense: Thermal Infrared Applications XXXIX, 102140X (Presented at SPIE Commercial + Scientific Sensing and Imaging: April 12, 2017; Published: 5 May 2017); https://doi.org/10.1117/12.2267851.