Lithographical patterning on the surface of a fine pipe with a thin wall is required for fabricating three-dimensional micro-parts. For this reason, a new exposure system was developed for printing patterns on a cylindrical pipe. In the exposure system, the pipe was rotated 360° synchronous to a linear scan of a reticle. Stent-like resist patterns with a mean width of 185 μm were printed on a surface of stainless-steel pipe 2 mm in diameter. Next, the patterned pipe was chemically etched and stent-like meshed pipes with a mean mesh width of 110 μm were fabricated.
Kaiki Ito, Yuta Suzuki, and Toshiyuki Horiuchi, "Fabrication of cylindrical micro-parts using synchronous rotary scan-projection lithography and chemical etching," Proc. SPIE 10451, Photomask Technology, 104510G (Presented at SPIE Photomask Technology and EUV Lithography: September 11, 2017; Published: 16 October 2017); https://doi.org/10.1117/12.2284735.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 12,000 conference presentations, including many plenary and keynote presentations.