As device scaling continues, controlling defect densities on the wafer becomes essential for high volume manufacturing (HVM). One type of defect, the non-selective SiGe nodule, becomes more difficult to control during SiGe epitaxy (EPI) growth for p-type field effect transistor (pFET) source and drain. The process window for SiGe EPI growth with low nodule density becomes extremely tight due to the shrinking of contact poly pitch (CPP). Any tiny process shift or incoming structure shift could introduce a high density of nodules, which could affect device performance and yield. The current defect inspection method has a low throughput, so a fast and quantitative characterization technique is preferred for measuring and monitoring this type of defect.
Scatterometry is a fast and non-destructive in-line metrology technique. In this work, novel methods were developed to accurately and comprehensively measure the SiGe nodules with scatterometry information. Top-down critical dimension scanning electron microscopy (CD-SEM) images were collected and analyzed on the same location as scatterometry measurement for calibration. Machine learning (ML) algorithms are used to analyze the correlation between the raw spectra and defect density and area fraction. The analysis showed that the defect density and area fractions can be measured separately by correlating intensity variations. In addition to the defect density and area fraction, we also investigate a novel method – model-based scatterometry hybridized with machine learning capabilities – to quantify the average height of the defects along the sidewall of the gate. Hybridizing the machine learning method with the model-based one could also eliminate the possibility of misinterpreting the defect as some structural parameters. Furthermore, cross-sectional TEM and SEM measurement are used to calibrate the model-based scatterometry results. In this work, the correlation between the SiGe nodule defects and the structural parameters of the device is also studied. The preliminary result shows that there is strong correlation between the defect density and spacer thickness. Correlations between the defect density and the structural parameters provides useful information for process engineers to optimize the EPI growth process. With the advances in the scatterometry-based defect measurement metrology, we demonstrate such fast, quantitative, and comprehensive measurement of SiGe nodule defects can be used to improve the throughput and yield.
Dexin Kong, Robin Chao, Mary Breton, Chi-chun Liu, Gangadhara Raja Muthinti, Soon-cheon Seo, Nicolas J. Loubet, Pietro Montanini, John Gaudiello, Veeraraghavan Basker, Aron Cepler, Susan Ng-Emans, Matthew Sendelbach, Itzik Kaplan, Gilad Barak, Daniel Schmidt, and Julien Frougier, "In-line characterization of non-selective SiGe nodule defects with scatterometry enabled by machine learning," Proc. SPIE 10585, Metrology, Inspection, and Process Control for Microlithography XXXII, 1058510 (Presented at SPIE Advanced Lithography: February 28, 2018; Published: 5 September 2018); https://doi.org/10.1117/12.2297377.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the proceedings. They include the speaker's narration with video of the slides and animations. Most include full-text papers. Interactive, searchable transcripts and closed captioning are now available for 2018 presentations, with transcripts for prior recordings added daily.
Search our growing collection of more than 16,000 conference presentations, including many plenaries and keynotes.