Plasmonic band gap is a range of frequencies, within which, surface plasmon polaritons cannot propagate for any wavevector. Unfortunately the first plasmonic band gap cannot be observed directly in reflectance spectroscopy . To detect it, biharmonic metal-air surface structuring is conventionally utilized [2,3]. However in this case experimental geometry is strictly limited to normal angle of incidence, which is not compatible with large range of applications.
In current work we introduce biperiodic plasmonic crystals. We experimentally demonstrate, that biperiodic structuring allows to tune band gap spectral-angular position.
Laser interference lithography (LIL) is a well-established technique for creating periodic planar nanostructures over a large surface area. LIL allows to precisely control the modulation period and depth and thus perfectly match diffraction coupling conditions and tune plasmonic band gap properties.
We used LIL experimental setup based on Lloyd interferometer. The radiation from the laser source (He-Cd, wavelength 325 nm, average power 14 mW) was spatially filtered and then formed interference pattern on the silicon wafer, covered with a thin layer of SU-8 2015. The structure period was defined by the incident angle on the interferometer. Modulation depth was defined by exposure time. By applying subsequent second exposure with another angle of incidence, we obtained biperiodic structure. Exposed samples were washed in corresponding developer, dried in air and later sputtered with 100 nm of aluminium.
We fabricated a set of biperiodic plasmonic crystals with different periods and modulation depths. The quality and geometrical parameters of biperiodic plasmonic crystals were monitored by scanning electron microscopy and atomic force microscopy. The appearance of plasmonic band gap was measured by spectral-angular polarisation spectroscopy. We experimentally determined the dependance of plasmonic band gap properties (width and position) on geometrical parameters of biperiodic plasmonic crystals. We also performed FDTD numerical simulations (Lumerical). The experimental results are in good agreement with numerical calculations.
 Raether, Heinz. [Surface Plasmons on Smooth and Rough Surfaces and on Gratings.], Springer Berlin Heidelberg, 91-105 (1988).
 Barnes, William L., et al. "Physical origin of photonic energy gaps in the propagation of surface plasmons on gratings." Physical Review B 54.9 (1996): 6227.
 Kocabas, Askin, S. Seckin Senlik, and Atilla Aydinli. "Plasmonic band gap cavities on biharmonic gratings." Physical Review B 77.19 (2008): 195130.
Igor S. Balashov, Alexander A. Chezhegov, Andrey A. Grunin, Artem V. Chetvertukhin, and Andrey A. Fedyanin, "Tunable band gap biperiodic plasmonic crystals fabricated by laser interference lithography (Conference Presentation)," Proc. SPIE 10672, Nanophotonics VII, 106721F (Presented at SPIE Photonics Europe: April 25, 2018; Published: 23 May 2018); https://doi.org/10.1117/12.2307579.5788807908001.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the proceedings. They include the speaker's narration with video of the slides and animations. Most include full-text papers. Interactive, searchable transcripts and closed captioning are now available for 2018 presentations, with transcripts for prior recordings added daily.
Search our growing collection of more than 16,000 conference presentations, including many plenaries and keynotes.