From Event: SPIE OPTO, 2019
We present a U-bend design for traveling wave III-V gain devices, such as semiconductor optical amplifiers and laser diodes. The design greatly simplifies the butt-coupling between the III-V chip and silicon-on-insulator photonic circuit by bringing the I/O ports on one facet. This removes the need for precise dimension control otherwise required for 2-side coupling, therefore increasing the yield of mounted devices towards 100%. The design, fabrication and characterization of the U-bend device based on Euler bend geometry is presented. The losses for a bend with a minimum bending radius of 83 μm are 1.1 dB. In addition, we present an analysis comparing the yield and coupling losses of the traditionally cleaved devices with the results that the Euler bend approach enable, with the final conclusion that the yield is improved by several times while the losses are decreased by several dB.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jukka Viheriälä, Heidi Tuorila, Nouman Zia, Matteo Cherchi, Timo Aalto, and Mircea Guina, "1.3 µm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics ," Proc. SPIE 10923, Silicon Photonics XIV, 109230E (Presented at SPIE OPTO: February 05, 2019; Published: 4 March 2019); https://doi.org/10.1117/12.2505935.