From Event: SPIE Defense + Commercial Sensing, 2019
This study investigates the response of flexible piezoelectric materials exposed to blast wave pressure impulses from inair and underwater explosions. A shock tube was used to produce reproducible shock waves from explosions with average peak pressures in excess of 1,000 kPa for underwater experiments and 100 kPa for in-air experiments. Flexible piezoelectric polyvinylidene fluoride (PVDF) and lead zirconate titanate Pb(Zr,Ti)O3 (PZT) materials were tested for sensing the pressure impulse generated from an explosion. The rise time, peak amplitude, and duration of the blast wave pressure impulse were measured for each piezoelectric material and compared to an OEM blast wave sensor. This study uniquely identifies flexible piezoelectric materials that can accurately measure the blast wave pressure impulse from both in-air and underwater explosions. The accurate response and flexibility of the selected piezoelectric materials demonstrate the potential to be integrated into several forms of sensors, including wearable. Military and industrial applications can potentially benefit from a wearable blast wave sensor to improve medical diagnosis and treatment of blast exposure.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kyle Willens, Richard Mannschreck, Blake Muzinich, Christopher Rosa, Barkan Kavlicoglu, Geoff Brennecka, and Faramarz Gordaninejad, "Blast wave sensing from flexible piezoelectric materials," Proc. SPIE 11020, Smart Biomedical and Physiological Sensor Technology XVI, 110200Q (Presented at SPIE Defense + Commercial Sensing: April 16, 2019; Published: 2 May 2019); https://doi.org/10.1117/12.2519141.