From Event: SPIE Optical Engineering + Applications, 2016
We propose a method to determine the required performances of the positioning mechanics of the optical elements of a
beamline. Generally, when designing and specifying a beamline, one assumes that the position and orientations of the
optical elements should be aligned to its ideal position. For this, one would generally require six degrees of freedom per
optical element. However, this number is reduced due to symmetries (e.g. a flat mirror does not care about yaw).
Generally, one ends up by motorizing many axes, with high resolution and a large motion range. On the other hand, the
diagnostics available at a beamline provide much less variables than the available motions. Moreover, the actual
parameters that one wants to optimize are reduced to a very few. These are basically, spot size and size at the sample,
flux, and spectral resolution. The result is that many configurations of the beamline are actually equivalent, and therefore
indistinguishable from the ideal alignment in terms of performance.We propose a method in which the effect of
misalignment of each one of the degrees of freedom of the beamline is scanned by ray tracing. This allows building a
linear system in which one can identify and select the best set of motions to control the relevant parameters of the beam.
Once the model is built it provides the required optical pseudomotors as well as the requirements in alignment and
manufacturing, for all the motions, as well as the range, resolution and repeatability of the motorized axes.
P. Pedreira, I. Sics, M. Llonch, J. Ladrera, Ll. Ribó, C. Colldelram, and J. Nicolas, "Ray-tracing as a tool for efficient specification of beamline optical components," Proc. SPIE 9962, Advances in Metrology for X-Ray and EUV Optics VI, 99620H (Presented at SPIE Optical Engineering + Applications: August 29, 2016; Published: 8 September 2016); https://doi.org/10.1117/12.2237599.
Conference Presentations are recordings of oral presentations given at SPIE conferences and published as part of the conference proceedings. They include the speaker's narration along with a video recording of the presentation slides and animations. Many conference presentations also include full-text papers. Search and browse our growing collection of more than 14,000 conference presentations, including many plenary and keynote presentations.
Study of self-shadowing effect as a simple means to realize nanostructured thin films and layers with special attentions to birefringent obliquely deposited thin films and photo-luminescent porous silicon