PROCEEDINGS VOLUME 10009
THIRD EUROPEAN SEMINAR ON PRECISION OPTICS MANUFACTURING | 12-13 APRIL 2016
Third European Seminar on Precision Optics Manufacturing
IN THIS VOLUME

0 Sessions, 27 Papers, 0 Presentations
Front Matter  (1)
THIRD EUROPEAN SEMINAR ON PRECISION OPTICS MANUFACTURING
12-13 April 2016
Teisnach, Germany
Front Matter
Proc. SPIE 10009, Front Matter, 1000901 (1 July 2016); doi: 10.1117/12.2246641
Third European Seminar on Precision Optics Manufacturing
Proc. SPIE 10009, Improving efficiency of chemo-mechanical polishing processes by systematic selection and conditioning of the polishing suspension, 1000902 (30 June 2016); doi: 10.1117/12.2236000
Proc. SPIE 10009, Analysis of tool-mass-acceleration effects onto sub-aperture computer controlled polishing (CCP), 1000903 (30 June 2016); doi: 10.1117/12.2236024
Proc. SPIE 10009, Aspheric mismatch of rigid tools, 1000904 (30 June 2016); doi: 10.1117/12.2235536
Proc. SPIE 10009, Chemical influence of different pH-values on ductile mode processing through ultra-precision diamond turning, 1000905 (30 June 2016); doi: 10.1117/12.2235850
Proc. SPIE 10009, Hexapod as primary kinematic system for applications in the optic industry, 1000906 (30 June 2016); doi: 10.1117/12.2235400
Proc. SPIE 10009, Automatic inspection for surface imperfections: requirements, potentials and limits , 1000907 (30 June 2016); doi: 10.1117/12.2235863
Proc. SPIE 10009, A novel approach towards standardizing surface quality inspection, 1000908 (30 June 2016); doi: 10.1117/12.2235743
Proc. SPIE 10009, In plane laser-interferometric sensor, 1000909 (30 June 2016); doi: 10.1117/12.2235860
Proc. SPIE 10009, Deflectometric acquisition of large optical surfaces (DaOS) using a new physical measurement principle: vignetting field stop procedure, 100090A (30 June 2016); doi: 10.1117/12.2236134
Proc. SPIE 10009, Form measurement of large optics with deflectometric and interferometric procedures at PTB , 100090B (30 June 2016); doi: 10.1117/12.2235474
Proc. SPIE 10009, Capabilities and perfomance of the wavefront-based alignment in multi element optical systems, 100090C (30 June 2016); doi: 10.1117/12.2236196
Proc. SPIE 10009, Survey of fiducials, edges and the backside surface for the measurement of aspheres and freeforms, 100090D (30 June 2016); doi: 10.1117/12.2235688
Proc. SPIE 10009, Performance measurement of high precision optical assemblies for cosmological observations: comparison of different approaches, 100090F (30 June 2016); doi: 10.1117/12.2235210
Proc. SPIE 10009, Fluid jet polishing of steel moulds, 100090J (30 June 2016); doi: 10.1117/12.2235998
Proc. SPIE 10009, ISERM: in-situ etch rate measurement system, 100090N (30 June 2016); doi: 10.1117/12.2236642
Proc. SPIE 10009, Closing the metrology/process loop in CNC polishing, 100090O (30 June 2016); doi: 10.1117/12.2235530
Proc. SPIE 10009, Integrating production machines in a manufacturing execution system (MES), 100090P (30 June 2016); doi: 10.1117/12.2235999
Proc. SPIE 10009, Improving low, mid and high-spatial frequency errors on advanced aspherical and freeform optics with MRF , 100090R (30 June 2016); doi: 10.1117/12.2236034
Proc. SPIE 10009, Precision glass molding: cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13µm thermal infrared, 100090W (30 June 2016); doi: 10.1117/12.2235475
Proc. SPIE 10009, Interferometric measurement of highly accurate flat surfaces, 100090X (30 June 2016); doi: 10.1117/12.2235525
Proc. SPIE 10009, An investigation on the efficiency of the manufacturing of components in precision optics, 100090Y (30 June 2016); doi: 10.1117/12.2236137
Proc. SPIE 10009, Prediction of grinding tool wear and lifetime by using a test bench, 100090Z (30 June 2016); doi: 10.1117/12.2236212
Proc. SPIE 10009, Surface reconstruction by using Zernike polynomials, 1000910 (30 June 2016); doi: 10.1117/12.2236305
Proc. SPIE 10009, Numerical simulation of pitch button blocking optimization, 1000911 (30 June 2016); doi: 10.1117/12.2236356
Proc. SPIE 10009, From holographic displays to volume gratings and off-axis parabolic mirrors, 1000912 (30 June 2016); doi: 10.1117/12.2245183
Proc. SPIE 10009, Process control for centering of cemented components, 1000913 (30 June 2016); doi: 10.1117/12.2235173
Back to Top