PROCEEDINGS VOLUME 1276
THE INTERNATIONAL CONGRESS ON OPTICAL SCIENCE AND ENGINEERING | 12-16 MARCH 1990
CO2 Lasers and Applications II
IN THIS VOLUME

0 Sessions, 43 Papers, 0 Presentations
Lasers  (10)
Systems  (5)
Optics  (6)
Cut and Weld  (4)
Surfacing  (10)
THE INTERNATIONAL CONGRESS ON OPTICAL SCIENCE AND ENGINEERING
12-16 March 1990
The Hague, Netherlands
Lasers
Proc. SPIE 1276, High-power CO2 waveguide laser of the 1-kW category, 0000 (1 October 1990); doi: 10.1117/12.20528
Proc. SPIE 1276, Excitation of CO2 lasers by microwave discharges, 0000 (1 October 1990); doi: 10.1117/12.20529
Proc. SPIE 1276, Characteristics of a compact rf-excited 12-kW CO2 laser, 0000 (1 October 1990); doi: 10.1117/12.20530
Proc. SPIE 1276, Investigation of the gas composition in sealed-off rf-excited CO2 lasers, 0000 (1 October 1990); doi: 10.1117/12.20531
Proc. SPIE 1276, Transverse pattern modifications in a stable apertured CO2 laser resonator, 0000 (1 October 1990); doi: 10.1117/12.20532
Proc. SPIE 1276, Experimental results of an e-beam-controlled, repetitively pulsed CO2 laser, 0000 (1 October 1990); doi: 10.1117/12.20533
Proc. SPIE 1276, Influence of active medium fluctuations on high-power laser amplifier performances, 0000 (1 October 1990); doi: 10.1117/12.20534
Proc. SPIE 1276, Narrow Gaussian CO2 laser beam in an M mode of a rectangular sheath cavity, 0000 (1 October 1990); doi: 10.1117/12.20535
Proc. SPIE 1276, Small-scale TEA CO2 laser utilizing nonconventional ternary CO2/N2/H2 gas mixture, 0000 (1 October 1990); doi: 10.1117/12.20536
Systems
Proc. SPIE 1276, Analysis of thermally induced optical distortion in lens during focusing high-power CO2 laser beam, 0000 (1 October 1990); doi: 10.1117/12.20537
Proc. SPIE 1276, Laser robotic for 3-D cutting and welding, 0000 (1 October 1990); doi: 10.1117/12.20538
Proc. SPIE 1276, Three-dimensional CO2 laser material processing with gantry machine systems, 0000 (1 October 1990); doi: 10.1117/12.20539
Proc. SPIE 1276, CO2 laser mounted on a robot for dynamic cutting manipulations, 0000 (1 October 1990); doi: 10.1117/12.20540
Optics
Proc. SPIE 1276, Characterization of plastic hollow fibers for transmitting CO2 laser radiation for medical use, 0000 (1 October 1990); doi: 10.1117/12.20541
Proc. SPIE 1276, Comparison of hollow metallic waveguides with optical fibers for IR laser propagation, 0000 (1 October 1990); doi: 10.1117/12.20542
Proc. SPIE 1276, Studying the difference between OFHC mirrors and copper single-crystal mirrors under low CO2 laser energy to investigate the increasing surface roughness under thermal load, 0000 (1 October 1990); doi: 10.1117/12.20543
Proc. SPIE 1276, Novel aerodynamic window with a pump cavity and a supersonic jet, 0000 (1 October 1990); doi: 10.1117/12.20544
Proc. SPIE 1276, Detection of errant laser beams, 0000 (1 October 1990); doi: 10.1117/12.20545
Proc. SPIE 1276, Novel shaping optics of CO2 laser beam: LSV optics--principles and applications, 0000 (1 October 1990); doi: 10.1117/12.20546
Cut and Weld
Proc. SPIE 1276, Experimental study of the relationship between in-process signals and cut quality in gas-assisted laser cutting, 0000 (1 October 1990); doi: 10.1117/12.20547
Proc. SPIE 1276, Cutting and welding of aluminum with a high-repetition-rate pulsed CO2 laser, 0000 (1 October 1990); doi: 10.1117/12.20548
Proc. SPIE 1276, Laser welding dissimilar metals as alternative to brazing: experimental results, economical and quality evaluations, applications in production line, 0000 (1 October 1990); doi: 10.1117/12.20549
Proc. SPIE 1276, Influence of laser-beam-cutting on the mechanical-technological properties of grain-refined steel and aluminium alloys, 0000 (1 October 1990); doi: 10.1117/12.20550
Coherent Optics
Proc. SPIE 1276, Simplified model of deep penetration laser welding, 0000 (1 October 1990); doi: 10.1117/12.20551
Proc. SPIE 1276, Heterodyne lidar for wire detection and obstacle warning, 0000 (1 October 1990); doi: 10.1117/12.20552
Proc. SPIE 1276, Infrared two-dimensional acousto-optic time-integrating spectrum analyzer using a crystal of tellurium, 0000 (1 October 1990); doi: 10.1117/12.20553
Proc. SPIE 1276, Speckle reduction in CO2 heterodyne laser radar systems, 0000 (1 October 1990); doi: 10.1117/12.20554
Special Applications
Proc. SPIE 1276, Experimental studies of high-average-power pulsed CO2-laser-induced thermomechanical processes, 0000 (1 October 1990); doi: 10.1117/12.20555
Proc. SPIE 1276, High-power laser float-zone crystal growth, 0000 (1 October 1990); doi: 10.1117/12.20556
Surfacing
Proc. SPIE 1276, Recent developments in the surface treatment of materials, 0000 (1 October 1990); doi: 10.1117/12.20557
Proc. SPIE 1276, Melt dynamics in surface processing with laser radiation: calculations and applications, 0000 (1 October 1990); doi: 10.1117/12.20558
Proc. SPIE 1276, Beam guiding and shaping for surface processing with laser radiation, 0000 (1 October 1990); doi: 10.1117/12.20559
Proc. SPIE 1276, Laser hardfacing, 0000 (1 October 1990); doi: 10.1117/12.20560
Proc. SPIE 1276, Wear, corrosion, and cavitation erosion characteristics of laser-surface-alloyed gray cast iron, 0000 (1 October 1990); doi: 10.1117/12.20561
Proc. SPIE 1276, Surface melting of AlSi10Mg with CO2 laser radiation, 0000 (1 October 1990); doi: 10.1117/12.20562
Proc. SPIE 1276, Materials processing with copper vapor lasers, 0000 (1 October 1990); doi: 10.1117/12.20563
Proc. SPIE 1276, Finite element analysis of laser transformation hardening, 0000 (1 October 1990); doi: 10.1117/12.20564
Proc. SPIE 1276, Light-induced energy flow at a metal surface, 0000 (1 October 1990); doi: 10.1117/12.20565
Proc. SPIE 1276, Absorption measurements in continuous high-power CO2 laser processing of materials, 0000 (1 October 1990); doi: 10.1117/12.20566
Systems
Proc. SPIE 1276, Improvement of discharge pumping for pulsed high-pressure gas lasers, 0000 (1 October 1990); doi: 10.1117/12.20567
Special Applications
Proc. SPIE 1276, Factors affecting the efficiency in four-wave mixing of pulsed CO2 laser radiation in sulfur hexafluoride, 0000 (1 October 1990); doi: 10.1117/12.20568
Lasers
Proc. SPIE 1276, Radial blower for gas circulation in a compact 2-kW CO2 laser, 0000 (1 October 1990); doi: 10.1117/12.20569
Special Applications
Proc. SPIE 1276, Information system for laser materials processing, 0000 (1 October 1990); doi: 10.1117/12.20570
Back to Top