PROCEEDINGS VOLUME 2596
PHOTONICS EAST '95 | 22-26 OCTOBER 1995
Modeling, Simulation, and Control Technologies for Manufacturing
IN THIS VOLUME

0 Sessions, 26 Papers, 0 Presentations
Applications  (4)
Simulation  (4)
PHOTONICS EAST '95
22-26 October 1995
Philadelphia, PA, United States
Process Modeling
Proc. SPIE 2596, Fuzzy modeling of the manufacturing processes, 0000 (21 November 1995); doi: 10.1117/12.227206
Proc. SPIE 2596, Tool breakage detection in face milling by an unsupervised neural network, 0000 (21 November 1995); doi: 10.1117/12.227216
Proc. SPIE 2596, Kinematically optimal robot placement for minimum time coordinated motion, 0000 (21 November 1995); doi: 10.1117/12.227224
Proc. SPIE 2596, Learning control of optical lens machining, 0000 (21 November 1995); doi: 10.1117/12.227226
Proc. SPIE 2596, Inspection planning for coordinate metrology, 0000 (21 November 1995); doi: 10.1117/12.227227
Sensing, Modeling, and Scheduling
Proc. SPIE 2596, Direct generation of event-timing equations for generalized flow shop systems, 0000 (21 November 1995); doi: 10.1117/12.227228
Proc. SPIE 2596, Manufacturing dispatching controller design and deadlock avoidance using a matrix equation formulation, 0000 (21 November 1995); doi: 10.1117/12.227229
Proc. SPIE 2596, Solution to the next best view problem for automated CAD model acquisiton of free-form objects using range cameras, 0000 (21 November 1995); doi: 10.1117/12.227230
Proc. SPIE 2596, Sensor configuration for error detection and recovery, 0000 (21 November 1995); doi: 10.1117/12.227231
Proc. SPIE 2596, Optimal production flow control for a flexible manufacturing system, 0000 (21 November 1995); doi: 10.1117/12.227207
Error Compensation and Simulation
Proc. SPIE 2596, Data management for error compensation and process control, 0000 (21 November 1995); doi: 10.1117/12.227208
Proc. SPIE 2596, Fractal characteristic in the wearing of cutting tool, 0000 (21 November 1995); doi: 10.1117/12.227209
Proc. SPIE 2596, Analysis of accuracy of the two typical built-up ball leadscrew joints, 0000 (21 November 1995); doi: 10.1117/12.227210
Proc. SPIE 2596, Experimental simulation of on-line measurement of screw-thread steel bars, 0000 (21 November 1995); doi: 10.1117/12.227211
Applications
Proc. SPIE 2596, Autonomous agent for on-machine acceptance of machined components, 0000 (21 November 1995); doi: 10.1117/12.227212
Proc. SPIE 2596, Knowledge-based adaptive neural control of drum level in a boiler system, 0000 (21 November 1995); doi: 10.1117/12.227213
Proc. SPIE 2596, Intelligent vision-based part feeding on dynamic pursuit of moving objects, 0000 (21 November 1995); doi: 10.1117/12.227214
Proc. SPIE 2596, Computer-aided control in nonround process, 0000 (21 November 1995); doi: 10.1117/12.227215
Open Architecture Controllers
Proc. SPIE 2596, DFX via the Internet, 0000 (21 November 1995); doi: 10.1117/12.227217
Proc. SPIE 2596, Simulation and implementation of an open architecture controller, 0000 (21 November 1995); doi: 10.1117/12.227218
Proc. SPIE 2596, Manufacturing: workers, technology, and management, 0000 (21 November 1995); doi: 10.1117/12.227219
Proc. SPIE 2596, Just-enough-information: a new paradigm for production scheduling in a manufacturing supply network, 0000 (21 November 1995); doi: 10.1117/12.227220
Simulation
Proc. SPIE 2596, Indentation simulation on brittle materials by molecular dynamics, 0000 (21 November 1995); doi: 10.1117/12.227221
Proc. SPIE 2596, Simulation and analysis of complex human tasks for manufacturing, 0000 (21 November 1995); doi: 10.1117/12.227222
Proc. SPIE 2596, Distributed simulation approach for enabling cooperation between entities in heterarchical manufacturing systems, 0000 (21 November 1995); doi: 10.1117/12.227223
Proc. SPIE 2596, Implementation of simulated human grasping for manufacturing tasks, 0000 (21 November 1995); doi: 10.1117/12.227225
Back to Top