PROCEEDINGS VOLUME 2720
1996 SYMPOSIUM ON SMART STRUCTURES AND MATERIALS | 25-29 FEBRUARY 1996
Smart Structures and Materials 1996: Passive Damping and Isolation
1996 SYMPOSIUM ON SMART STRUCTURES AND MATERIALS
25-29 February 1996
San Diego, CA, United States
Aerospace Applications
Proc. SPIE 2720, Comparison of damping treatments for gas turbine blades, 0000 (1 May 1996); doi: 10.1117/12.239087
Proc. SPIE 2720, Vibration reduction in advanced composite turbo-fan blades using embedded damping materials, 0000 (1 May 1996); doi: 10.1117/12.239097
Proc. SPIE 2720, Viscoelastic struts for vibration mitigation of FORTE, 0000 (1 May 1996); doi: 10.1117/12.239106
Proc. SPIE 2720, Passive damping investigations for European space applications including possible interface damping in bolted and other connections, 0000 (1 May 1996); doi: 10.1117/12.239110
Commercial Applications
Proc. SPIE 2720, Investigation of passive and adaptive passive dynamic absorbers applied to an automatic washer suspension design, 0000 (1 May 1996); doi: 10.1117/12.239111
Proc. SPIE 2720, Constrained layer damping of a tennis racket, 0000 (1 May 1996); doi: 10.1117/12.239112
Proc. SPIE 2720, Application of small panel damping measurements to larger walls, 0000 (1 May 1996); doi: 10.1117/12.239113
Analysis and Design
Proc. SPIE 2720, Constrained layer damping system for box beams, 0000 (1 May 1996); doi: 10.1117/12.239114
Proc. SPIE 2720, Damping of vibrations of hollow beams using viscoelastic spheres, 0000 (1 May 1996); doi: 10.1117/12.239078
Proc. SPIE 2720, Transient analysis of controlled flexible structures with viscoelastic damping material, 0000 (1 May 1996); doi: 10.1117/12.239079
Proc. SPIE 2720, Damage detection of highly damped structures using direct frequency response measurements and residual force vectors, 0000 (1 May 1996); doi: 10.1117/12.239080
Civil Applications
Proc. SPIE 2720, Viscoelastic damper overview for seismic and wind applications, 0000 (1 May 1996); doi: 10.1117/12.239081
Proc. SPIE 2720, Control of torsional modes in buildings under seismic excitation by adaptive base isolation, 0000 (1 May 1996); doi: 10.1117/12.239082
Proc. SPIE 2720, Hybrid passive control techniques in earthquake engineering, 0000 (1 May 1996); doi: 10.1117/12.239083
Proc. SPIE 2720, Ball-cup and cylinder-cylinder dampers for structural vibration dissipation, 0000 (1 May 1996); doi: 10.1117/12.239084
Proc. SPIE 2720, Vibration damping admixtures for cement, 0000 (1 May 1996); doi: 10.1117/12.239085
Active Constrained Layer Damping
Proc. SPIE 2720, Comparison of active, passive, and hybrid damping treatments in structural design, 0000 (1 May 1996); doi: 10.1117/12.239086
Proc. SPIE 2720, Experimental investigation of a self-sensing active constrained layer damping treatment, 0000 (1 May 1996); doi: 10.1117/12.239088
Proc. SPIE 2720, Analysis and design of viscoelastic materials for active constrained layer damping treatments, 0000 (1 May 1996); doi: 10.1117/12.239089
Proc. SPIE 2720, Robust control of active constrained layer damping, 0000 (1 May 1996); doi: 10.1117/12.239090
Passive Piezoelectric Damping
Proc. SPIE 2720, Passive vibration suppression of rotating blades using piezoelectric devices, 0000 (1 May 1996); doi: 10.1117/12.239091
Proc. SPIE 2720, Nonlinear piezoelectric vibration absorbers, 0000 (1 May 1996); doi: 10.1117/12.239092
Proc. SPIE 2720, Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control, 0000 (1 May 1996); doi: 10.1117/12.239093
Isolation
Proc. SPIE 2720, Magnetically damped vibration isolation system for a space shuttle payload, 0000 (1 May 1996); doi: 10.1117/12.239094
Proc. SPIE 2720, High-performance passive viscous isolator element for active/passive (hybrid) isolation, 0000 (1 May 1996); doi: 10.1117/12.239095
Proc. SPIE 2720, Comparison of single- and two-degree-of-freedom models for passive and active vibration isolation design, 0000 (1 May 1996); doi: 10.1117/12.239096
Proc. SPIE 2720, Design of polymer-based mechanical filters for shock-measurement accelerometers, 0000 (1 May 1996); doi: 10.1117/12.239098
Proc. SPIE 2720, Substructure synthesis method applied to vibration isolation systems, 0000 (1 May 1996); doi: 10.1117/12.239099
Viscoelastic Damping and Material
Proc. SPIE 2720, Analysis and test of a damped composite sandwich structure, 0000 (1 May 1996); doi: 10.1117/12.239100
Proc. SPIE 2720, Direct complex stiffness test system for viscoelastic material properties, 0000 (1 May 1996); doi: 10.1117/12.239101
Proc. SPIE 2720, Optimization of intrinsic damping by exploitation of fiber orientation within viscoelastic composites, 0000 (1 May 1996); doi: 10.1117/12.239102
Proc. SPIE 2720, Highly damped carbon-fiber polymer-matrix composites, 0000 (1 May 1996); doi: 10.1117/12.239103
Proc. SPIE 2720, Cocured viscoelastic composites, 0000 (1 May 1996); doi: 10.1117/12.239104
Poster Session
Proc. SPIE 2720, Properties of Fe-Al-Si high-damping steel, 0000 (1 May 1996); doi: 10.1117/12.239105
Analysis and Design
Proc. SPIE 2720, Identifying damping of a subsystem by two inverse-dynamics methods, 0000 (1 May 1996); doi: 10.1117/12.239107
Active Constrained Layer Damping
Proc. SPIE 2720, Identification and simulation of a beam with active constrained layer damping using MATAB/SIMULINK, 0000 (1 May 1996); doi: 10.1117/12.239108
Poster Session
Proc. SPIE 2720, Smart vibration-isolated stage with ultralow resonance frequency, 0000 (1 May 1996); doi: 10.1117/12.239109
Back to Top