PROCEEDINGS VOLUME 2989
PHOTONICS WEST '97 | 8-14 FEBRUARY 1997
Modeling and Simulation of Higher-Power Laser Systems IV
PHOTONICS WEST '97
8-14 February 1997
San Jose, CA, United States
Design Studies of Solid State Lasers
Proc. SPIE 2989, Numerical designs of 100-kW-class solid-media lasers, 0000 (2 May 1997); doi: 10.1117/12.273659
Proc. SPIE 2989, Modeling high-brightness kW solid state lasers, 0000 (2 May 1997); doi: 10.1117/12.273668
Proc. SPIE 2989, Simulations of the lasing properties of a thin-disk laser combining high-output powers with good beam quality, 0000 (2 May 1997); doi: 10.1117/12.273678
Proc. SPIE 2989, Analytical model for output optimization of fiber-coupled laser-diode end-pumped lasers, 0000 (2 May 1997); doi: 10.1117/12.273679
Numerical Studies in High-Power Lasers
Proc. SPIE 2989, Estimating stress and strain in end-pumped laser crystals: the case of Cr:LiCAF rod, 0000 (2 May 1997); doi: 10.1117/12.273680
Proc. SPIE 2989, Modeling of efficient mode-matching and thermal-lensing effect on a laser-beam coupling into a mode-cleaner cavity, 0000 (2 May 1997); doi: 10.1117/12.273681
Proc. SPIE 2989, Theoretical modeling of diode-laser-pumped 3-um Er3+ crystal lasers, 0000 (2 May 1997); doi: 10.1117/12.273682
Proc. SPIE 2989, Numerically calculated Q-switched laser output characteristics of high-power diode-laser-pumped Nd:YAG laser, 0000 (2 May 1997); doi: 10.1117/12.273660
Chemical Lasers
Proc. SPIE 2989, Two-dimensional source flow gain model for the chemical oxygen-iodine laser, 0000 (2 May 1997); doi: 10.1117/12.273661
Proc. SPIE 2989, New interpolation method to eliminate intensity spiking artifacts when modeling laser optical extraction, 0000 (2 May 1997); doi: 10.1117/12.273662
Proc. SPIE 2989, Analytical evaluation of kinetics in oxygen-iodine laser nozzle flows, 0000 (2 May 1997); doi: 10.1117/12.273663
Proc. SPIE 2989, Modeling of chemical oxygen-iodine lasers, 0000 (2 May 1997); doi: 10.1117/12.273664
Proc. SPIE 2989, Low-threshold VUV amplification in Kr gases with a bichromatic-coupling method, 0000 (2 May 1997); doi: 10.1117/12.273665
Free-Electron and Gas Lasers
Proc. SPIE 2989, Optical modeling of the Jefferson Laboratory IR demo FEL, 0000 (2 May 1997); doi: 10.1117/12.273666
Proc. SPIE 2989, Modeling of a filamental discharge formation and development in ArF excimer laser, 0000 (2 May 1997); doi: 10.1117/12.273667
Proc. SPIE 2989, Theoretical analysis of the energy-transfer process of a 2-kW XeCl laser with a spiker-sustainer circuit, 0000 (2 May 1997); doi: 10.1117/12.273669
Proc. SPIE 2989, Test stand for gas-discharge chamber of TEA CO2 lasers with pulse-periodical energy supply, 0000 (2 May 1997); doi: 10.1117/12.273670
Modeling of Nonlinear Effects
Proc. SPIE 2989, Numerical modeling of thermal effects in nonlinear crystals for high-average-power second harmonic generation, 0000 (2 May 1997); doi: 10.1117/12.273671
Proc. SPIE 2989, Dual-wavelength-pumped cascaded fiber-Raman converters for wide-range wavelength conversion, 0000 (2 May 1997); doi: 10.1117/12.273672
Proc. SPIE 2989, Computer simulation of generation and propagation of ultrashort high-power laser pulses in optical systems, 0000 (2 May 1997); doi: 10.1117/12.273673
High-Power Laser Effects
Proc. SPIE 2989, Modeling of high-power cw Nd:YAG laser welding, 0000 (2 May 1997); doi: 10.1117/12.273674
Proc. SPIE 2989, Numerical modeling on pulse discharge for a high-power fast-axial-flow CO2 laser, 0000 (2 May 1997); doi: 10.1117/12.273675
Proc. SPIE 2989, High-power laser interaction with liquid aerosols, 0000 (2 May 1997); doi: 10.1117/12.273676
Proc. SPIE 2989, Influence of wavefront dislocations on phase conjugation instability with thermal blooming compensation, 0000 (2 May 1997); doi: 10.1117/12.273677
Back to Top