PROCEEDINGS VOLUME 3518
PHOTONICS EAST (ISAM, VVDC, IEMB) | 1-6 NOVEMBER 1998
Sensors and Controls for Intelligent Machining, Agile Manufacturing, and Mechatronics
IN THIS VOLUME

0 Sessions, 30 Papers, 0 Presentations
Sensors  (6)
PHOTONICS EAST (ISAM, VVDC, IEMB)
1-6 November 1998
Boston, MA, United States
Sensors
Proc. SPIE 3518, Data fusion using a hierarchy of self-organizing feature maps, 0000 (17 December 1998); doi: 10.1117/12.332783
Proc. SPIE 3518, Machine vision monitoring of tool wear, 0000 (17 December 1998); doi: 10.1117/12.332791
Proc. SPIE 3518, Fourier series analysis for in-process inspection of XFP SMT solder joints, 0000 (17 December 1998); doi: 10.1117/12.332800
Proc. SPIE 3518, Low-cost digital-signal-processor-based optical position sensor and its application to vibration control, 0000 (17 December 1998); doi: 10.1117/12.332807
Proc. SPIE 3518, Automated and intelligent online quality analysis of polymer film, 0000 (17 December 1998); doi: 10.1117/12.332808
Proc. SPIE 3518, New digital tomosynthesis system to monitor the soldering states of a ball grid array, 0000 (17 December 1998); doi: 10.1117/12.332809
Control Systems I
Proc. SPIE 3518, Reliable servo system design with redundant sensors, 0000 (17 December 1998); doi: 10.1117/12.332810
Proc. SPIE 3518, User-friendly method for tuning fuzzy logic controllers, 0000 (17 December 1998); doi: 10.1117/12.332811
Proc. SPIE 3518, Sliding mode controller for positioning servo systems with parameter perturbances, 0000 (17 December 1998); doi: 10.1117/12.332812
Control Systems II
Proc. SPIE 3518, Development and implementation of an application programming interface for PC/DSP-based motion control system, 0000 (17 December 1998); doi: 10.1117/12.332784
Proc. SPIE 3518, Modeling and parameter identification of impulse response matrix of mechanical systems, 0000 (17 December 1998); doi: 10.1117/12.332785
Proc. SPIE 3518, Market-based control of active surfaces, 0000 (17 December 1998); doi: 10.1117/12.332786
System Integration
Proc. SPIE 3518, Framework for component-based CNC machines, 0000 (17 December 1998); doi: 10.1117/12.332787
Proc. SPIE 3518, Introduction to mimic engineering: concept of holonic control, 0000 (17 December 1998); doi: 10.1117/12.332788
Process Modeling and Control
Proc. SPIE 3518, Feature-based machining system using STEP, 0000 (17 December 1998); doi: 10.1117/12.332789
Proc. SPIE 3518, Multivariate process modeling of high-volume manufacturing of consumer electronics, 0000 (17 December 1998); doi: 10.1117/12.332790
Proc. SPIE 3518, Production of rotational parts in small-series and computer-aided planning of its production engineering, 0000 (17 December 1998); doi: 10.1117/12.332792
Proc. SPIE 3518, Modeling of vibration of twist drills, 0000 (17 December 1998); doi: 10.1117/12.332793
Proc. SPIE 3518, Accurate machining and production geometry of complicated driving pairs, 0000 (17 December 1998); doi: 10.1117/12.332794
Mechatronics I
Proc. SPIE 3518, Analysis, design, and control of a novel optically commutated adjustable-speed motor, 0000 (17 December 1998); doi: 10.1117/12.332795
Proc. SPIE 3518, Control of ultrahigh-precision magnetic leadscrew using recurrent neural networks, 0000 (17 December 1998); doi: 10.1117/12.332796
Proc. SPIE 3518, Mechatronic long cane as a travel aid for the blind, 0000 (17 December 1998); doi: 10.1117/12.332797
Proc. SPIE 3518, Mechatronics education at Virginia Tech, 0000 (17 December 1998); doi: 10.1117/12.332798
Mechatronics II
Proc. SPIE 3518, Miniaturized sensor module for a mechatronic bearing, 0000 (17 December 1998); doi: 10.1117/12.332799
Proc. SPIE 3518, Design of a mechatronic bearing through sensor integration, 0000 (17 December 1998); doi: 10.1117/12.332801
Proc. SPIE 3518, Mechatronic objects for real-time control software development, 0000 (17 December 1998); doi: 10.1117/12.332802
Proc. SPIE 3518, Open-architecture controller for semiconductor assembly system, 0000 (17 December 1998); doi: 10.1117/12.332803
Mechatronics III
Proc. SPIE 3518, Optimal input shaper design and application to high-speed robotic workcells, 0000 (17 December 1998); doi: 10.1117/12.332804
Proc. SPIE 3518, Application of adaptive texture filters to the automated visual inspection of antibiotic susceptibility tests, 0000 (17 December 1998); doi: 10.1117/12.332805
Proc. SPIE 3518, Configuration control of a modular arm with N active links, 0000 (17 December 1998); doi: 10.1117/12.332806
Back to Top