PROCEEDINGS VOLUME 4444
INTERNATIONAL SYMPOSIUM ON OPTICAL SCIENCE AND TECHNOLOGY | 29 JULY - 3 AUGUST 2001
Optomechanical Design and Engineering 2001
IN THIS VOLUME

0 Sessions, 36 Papers, 0 Presentations
Session I  (5)
Session III  (4)
Session IV  (5)
Session V  (5)
Session VI  (4)
Session VII  (4)
Session VIII  (4)
Proceedings Volume 4444 is from: Logo
INTERNATIONAL SYMPOSIUM ON OPTICAL SCIENCE AND TECHNOLOGY
29 July - 3 August 2001
San Diego, CA, United States
Session I
Proc. SPIE 4444, Design and fabrication of a lightweight laser scanning mirror from metal-matrix composites, 0000 (5 November 2001); doi: 10.1117/12.447290
Proc. SPIE 4444, Dimensional stability of CFRP composites for space-based reflectors, 0000 (5 November 2001); doi: 10.1117/12.447300
Proc. SPIE 4444, Alignment of a grazing incidence x-ray interferometer, 0000 (5 November 2001); doi: 10.1117/12.447311
Proc. SPIE 4444, Optical performance of bimetallic mirrors under thermal environment, 0000 (5 November 2001); doi: 10.1117/12.447319
Joint Session with Optical Manufacturing and Testing IV
Proc. SPIE 4444, Ultralightweight C-SiC composite mirrors, 0000 (5 November 2001); doi: 10.1117/12.447322
Proc. SPIE 4444, Lightweight SiC foamed mirrors for space applications, 0000 (5 November 2001); doi: 10.1117/12.447323
Session III
Proc. SPIE 4444, Optimization methods for thermal modeling of optomechanical systems, 0000 (5 November 2001); doi: 10.1117/12.447324
Proc. SPIE 4444, Structural analysis of a 50-cm-diameter open-back triangular cell beryllium mirror in a cryogenic environment, 0000 (5 November 2001); doi: 10.1117/12.447325
Proc. SPIE 4444, Optomechanical analysis of segmented/adaptive optics, 0000 (5 November 2001); doi: 10.1117/12.447291
Proc. SPIE 4444, Analysis and verification of Hobby-Eberly Telescope 1-m mirror deflections due to edge sensor loading, 0000 (5 November 2001); doi: 10.1117/12.447292
Session IV
Proc. SPIE 4444, Thermal radiative properties of the microwave anisotropy probe telescope, 0000 (5 November 2001); doi: 10.1117/12.447293
Proc. SPIE 4444, Structural and thermal modeling of a cooled CCD camera, 0000 (5 November 2001); doi: 10.1117/12.447294
Proc. SPIE 4444, Athermal design and analysis for WDM applications, 0000 (5 November 2001); doi: 10.1117/12.447295
Proc. SPIE 4444, Thermo-elastic stability of a fiber optic spread-spectrum encoder, 0000 (5 November 2001); doi: 10.1117/12.447296
Session V
Proc. SPIE 4444, Performance factors, selection, and metrology of adhesives for optical applications, 0000 (5 November 2001); doi: 10.1117/12.447297
Proc. SPIE 4444, Bonding glass to metal with plastic for stability over temperature, 0000 (5 November 2001); doi: 10.1117/12.447298
Proc. SPIE 4444, Structural adhesives for bonding optics to metals: a study of optomechanical stability, 0000 (5 November 2001); doi: 10.1117/12.447299
Proc. SPIE 4444, Advances in light curing adhesives, 0000 (5 November 2001); doi: 10.1117/12.447301
Proc. SPIE 4444, Testing boresight stability of optomechanical subassemblies, 0000 (5 November 2001); doi: 10.1117/12.447302
Session VI
Proc. SPIE 4444, Optical metrology for testing an all-composite 2-m-diameter mirror, 0000 (5 November 2001); doi: 10.1117/12.447303
Proc. SPIE 4444, Comparison of full-aperture interferometry to subaperture stitched interferometry for a large-diameter fast mirror, 0000 (5 November 2001); doi: 10.1117/12.447304
Proc. SPIE 4444, Cryogenic (70-K) measurement of an all-composite 2-m-diameter mirror, 0000 (5 November 2001); doi: 10.1117/12.447305
Proc. SPIE 4444, Effects of aberrations (low order and quilting) on the performance of the all-composite design for the Herschel Space Observatory, 0000 (5 November 2001); doi: 10.1117/12.447306
Session VII
Proc. SPIE 4444, Applications of cylinders in Vs, 0000 (5 November 2001); doi: 10.1117/12.447307
Proc. SPIE 4444, Construction and calibration of a new design of fiber optic respiratory plethysmograph (FORP), 0000 (5 November 2001); doi: 10.1117/12.447308
Proc. SPIE 4444, CRYSTAL camera: an infrared prototype instrument for flow visualization between 90 and 313 K has been installed in a cryogenic wind tunnel, 0000 (5 November 2001); doi: 10.1117/12.447309
Proc. SPIE 4444, Wind buffeting effects on the Gemini 8-m primary mirrors, 0000 (5 November 2001); doi: 10.1117/12.447310
Session VIII
Proc. SPIE 4444, Mechanical aspects of a dual field of view infrared lens, 0000 (5 November 2001); doi: 10.1117/12.447312
Proc. SPIE 4444, Application of genetic algorithms for design optimization of a Bragg cell, 0000 (5 November 2001); doi: 10.1117/12.447313
Proc. SPIE 4444, Establishing calibration tolerances for a scanning seeker optical bench by correlating influence function and Code V analysis methods, 0000 (5 November 2001); doi: 10.1117/12.447314
Proc. SPIE 4444, High-accuracy focal plate alignment for the first commercial digital airborne camera ADS40, 0000 (5 November 2001); doi: 10.1117/12.447315
Posters - Thursday
Proc. SPIE 4444, Elastomeric mounting of collimating lenses in space solar telescope, 0000 (5 November 2001); doi: 10.1117/12.447316
Proc. SPIE 4444, Design and detection of superprecision positioning stage with nanometer resolution, 0000 (5 November 2001); doi: 10.1117/12.447317
Session I
Proc. SPIE 4444, Dual-frequency laser using anisotropic bireflectance film, 0000 (5 November 2001); doi: 10.1117/12.447318
Session IV
Proc. SPIE 4444, Software for integrated optical design analysis, 0000 (5 November 2001); doi: 10.1117/12.447320
Posters - Thursday
Proc. SPIE 4444, Semi-kinematic rails for construction of optical test stands, 0000 (5 November 2001); doi: 10.1117/12.447321
Back to Top