PROCEEDINGS VOLUME 6040
ICMIT 2005: MERCHATRONICS, MEMS, AND SMART MATERIALS | 20-23 SEPTEMBER 2005
ICMIT 2005: Mechatronics, MEMS, and Smart Materials
IN THIS VOLUME

0 Sessions, 95 Papers, 0 Presentations
ICMIT 2005: MERCHATRONICS, MEMS, AND SMART MATERIALS
20-23 September 2005
Chongqing, China
Plenary Session
Proc. SPIE 6040, New development of sensitive magnetic sensors for nondestructive evaluation of structural materials, 604001 (21 March 2006); doi: 10.1117/12.673598
Mechatronics and MEMS
Proc. SPIE 6040, Adaptable design of a flexible vibratory bowel-feeder, 604002 (21 March 2006); doi: 10.1117/12.664129
Proc. SPIE 6040, A framework for CNC turning system based on STEP-NC, 604003 (21 March 2006); doi: 10.1117/12.664130
Proc. SPIE 6040, A hybrid micro-accelerometer system with CMOS readout circuit and self-test function, 604004 (21 March 2006); doi: 10.1117/12.664131
Proc. SPIE 6040, A new method for calculating the microstructural stiffness of MEMS devices, 604005 (21 March 2006); doi: 10.1117/12.664132
Proc. SPIE 6040, A novel miniaturized EDM mechanism based on linear stepping ultrasonic motor, 604006 (21 March 2006); doi: 10.1117/12.664134
Proc. SPIE 6040, An approach for enhancing dynamic characteristics of differential pressure flow meters, 604007 (21 March 2006); doi: 10.1117/12.664135
Proc. SPIE 6040, Experimental study on rubber biaxial tensile, 604008 (21 March 2006); doi: 10.1117/12.664137
Proc. SPIE 6040, Application of instantaneous angular acceleration to diesel engine fault diagnosis, 604009 (21 March 2006); doi: 10.1117/12.664138
Proc. SPIE 6040, Study on the packaging integrity testing for polymer micro-device, 60400A (21 March 2006); doi: 10.1117/12.664140
Proc. SPIE 6040, Automatic recognition and classifier of online parts based on machine vision, 60400B (21 March 2006); doi: 10.1117/12.664143
Proc. SPIE 6040, CAD/CAM interface design of excimer laser micro-processing system, 60400C (21 March 2006); doi: 10.1117/12.664144
Proc. SPIE 6040, Coupling terms analysis for a 3-DOF parallel compliant mechanism, 60400D (21 March 2006); doi: 10.1117/12.664147
Proc. SPIE 6040, Damping characteristic analysis of MEMS inertial devices, 60400E (21 March 2006); doi: 10.1117/12.664148
Proc. SPIE 6040, Design and analysis on micro-worktable using novel symmetric flexure hinge based on micro-assembly, 60400F (21 March 2006); doi: 10.1117/12.664150
Proc. SPIE 6040, Design of an open-architecture EDM SoftCNC, 60400G (21 March 2006); doi: 10.1117/12.664151
Proc. SPIE 6040, Detection of small surface defects using DCT based enhancement approach in machine vision systems, 60400H (21 March 2006); doi: 10.1117/12.664153
Proc. SPIE 6040, Inherent engagement mechanism study of profile of scrolls, 60400I (21 March 2006); doi: 10.1117/12.664158
Proc. SPIE 6040, Integrated CAD/CAM/CNC system based on STEP-NC and intelligent manufacturing, 60400J (21 March 2006); doi: 10.1117/12.664159
Proc. SPIE 6040, Kinematics and meshing force analysis of the compound rolling teeth reducer, 60400K (21 March 2006); doi: 10.1117/12.664160
Proc. SPIE 6040, Product configuration knowledge expression based on ontology and tabular layouts of article characteristics, 60400L (21 March 2006); doi: 10.1117/12.664163
Proc. SPIE 6040, Rapid reverse engineering system of a free surface, 60400M (21 March 2006); doi: 10.1117/12.664164
Proc. SPIE 6040, Research and development of a computer control system for a screw dismantlement machine, 60400N (21 March 2006); doi: 10.1117/12.664165
Proc. SPIE 6040, Research and emulation of ranging in BPON system, 60400O (21 March 2006); doi: 10.1117/12.664166
Proc. SPIE 6040, Research and implemention on the high speed network system with CIINS based on ATM for aeronautical manufacturing enterprise, 60400P (21 March 2006); doi: 10.1117/12.664167
Proc. SPIE 6040, Research into a distributed fault diagnosis system and its application, 60400Q (21 March 2006); doi: 10.1117/12.664168
Proc. SPIE 6040, Research on an intelligent leather nesting system, 60400R (21 March 2006); doi: 10.1117/12.664170
Proc. SPIE 6040, Research on orbital cold forging for the edge cam of an automobile fuel injection pump, 60400S (21 March 2006); doi: 10.1117/12.664171
Proc. SPIE 6040, Research on rebuilding the data information environment for aeronautical manufacturing enterprise, 60400T (21 March 2006); doi: 10.1117/12.664172
Proc. SPIE 6040, Research on terminal behavior of electrostatically actuated micropump membrane based on modal analysis, 60400U (21 March 2006); doi: 10.1117/12.664174
Proc. SPIE 6040, Research on the vertical dynamics of high-speed elevator system, 60400V (21 March 2006); doi: 10.1117/12.664175
Proc. SPIE 6040, Research on the automatic dynamic balancing emendation integrated system with remote manipulating ability, 60400W (21 March 2006); doi: 10.1117/12.664176
Proc. SPIE 6040, Research on networked manufacturing system for reciprocating pump industry, 60400X (21 March 2006); doi: 10.1117/12.664177
Proc. SPIE 6040, Research on the state property of manufacturing resource in dynamic network environment, 60400Y (21 March 2006); doi: 10.1117/12.664178
Proc. SPIE 6040, Robust design of microchannel cooler, 60400Z (21 March 2006); doi: 10.1117/12.664180
Proc. SPIE 6040, Study of an NC system of machining crown gears, 604010 (21 March 2006); doi: 10.1117/12.664181
Proc. SPIE 6040, Study on development system of increasing gearbox for high-performance wind-power generator, 604011 (21 March 2006); doi: 10.1117/12.664182
Proc. SPIE 6040, The study on MEMS-based micro pump technology, 604012 (21 March 2006); doi: 10.1117/12.664183
Proc. SPIE 6040, The design and simulation of a practical micromachined relay, 604013 (21 March 2006); doi: 10.1117/12.664185
Proc. SPIE 6040, The designated harmonic suppression for SPWM, 604014 (21 March 2006); doi: 10.1117/12.664186
Proc. SPIE 6040, An experimental system for vibration sources identification with independent component analysis, 604015 (21 March 2006); doi: 10.1117/12.664187
Proc. SPIE 6040, Method for digitizing an object's section-profile using a liquid-filled vessel, 604016 (21 March 2006); doi: 10.1117/12.664188
Proc. SPIE 6040, The establishment of the virtual machine for nanometer drive parts under large feeding force and its actuation characteristic research, 604017 (21 March 2006); doi: 10.1117/12.664189
Proc. SPIE 6040, Wavelet-transform-based method of analysis for ultrasonic NDT signals of MMC adhesive interface, 604018 (21 March 2006); doi: 10.1117/12.664214
Proc. SPIE 6040, A novel demodulation method in MEMS gyroscope, 604019 (21 March 2006); doi: 10.1117/12.664215
Proc. SPIE 6040, An extraction algorithm of simplified IT characteristics curve from standard intelligent power switch (IPS) parameters, 60401A (21 March 2006); doi: 10.1117/12.664216
Proc. SPIE 6040, Design and performance analysis of PLL based self oscillation loop in vibrating gyroscope, 60401B (21 March 2006); doi: 10.1117/12.664217
Proc. SPIE 6040, Design of decoupled dual servo stage with voice coil motor and linear motor for XY long stroke ultra-precision scanning system, 60401C (21 March 2006); doi: 10.1117/12.664218
Proc. SPIE 6040, Elevator model based on a tiny PLC for teaching automation, 60401D (21 March 2006); doi: 10.1117/12.664219
Proc. SPIE 6040, Enhancement of boiler performance through optimized soot blower system for power plants, 60401E (21 March 2006); doi: 10.1117/12.664220
Proc. SPIE 6040, MEMS-based infrared detector for body thermometer, 60401F (21 March 2006); doi: 10.1117/12.664221
Proc. SPIE 6040, New shape design method of an epicycloidal gear for an epicycloid drive, 60401G (21 March 2006); doi: 10.1117/12.664222
Proc. SPIE 6040, Reliability evaluation of micro drills, 60401H (21 March 2006); doi: 10.1117/12.664223
Proc. SPIE 6040, The board implementation of AVR microcontroller checking for single event upsets, 60401I (21 March 2006); doi: 10.1117/12.664224
Proc. SPIE 6040, Nano hardness measurements of single crystal silica (Si) by an easy new technique, 60401J (21 March 2006); doi: 10.1117/12.664225
Medical and Health Welfare Instruments
Proc. SPIE 6040, A DC-servo baseline restorer and its implementation in biomedical instrumentation, 60401K (21 March 2006); doi: 10.1117/12.664226
Proc. SPIE 6040, A magnetic stimulator for medical applications and measurement of the magnetic field distribution, 60401L (21 March 2006); doi: 10.1117/12.664227
Proc. SPIE 6040, An edge-collect method for medical image based on B-spline wavelet, 60401M (21 March 2006); doi: 10.1117/12.664228