PROCEEDINGS VOLUME 9513
SPIE OPTICS + OPTOELECTRONICS | 13-16 APRIL 2015
High-Power, High-Energy, and High-Intensity Laser Technology II
Proceedings Volume 9513 is from: Logo
SPIE OPTICS + OPTOELECTRONICS
13-16 April 2015
Prague, Czech Republic
Front Matter: Volume 9513
Proc. SPIE 9513, Front Matter: Volume 9513, 951301 (10 June 2015); doi: 10.1117/12.2197745
High-Energy and High-Power DPSSL
Proc. SPIE 9513, DiPOLE100: A 100 J, 10 Hz DPSSL using cryogenic gas cooled Yb:YAG multi slab amplifier technology, 951302 (12 May 2015); doi: 10.1117/12.2180086
Proc. SPIE 9513, High-energy picosecond hybrid fiber/crystal laser for thin films solar cells micromachining, 951303 (12 May 2015); doi: 10.1117/12.2180234
Proc. SPIE 9513, Amplification of picosecond pulses to 100 W by an Yb:YAG thin-disk with CVBG compressor, 951304 (12 May 2015); doi: 10.1117/12.2178900
Proc. SPIE 9513, High average power picosecond and nanosecond laser operating at 1342nm wavelength, 951305 (12 May 2015); doi: 10.1117/12.2178786
Short-Pulse and High-Peak Power Lasers
Proc. SPIE 9513, Method of aligning a four-grating compressor for the petawatt-class PEARL-X laser system, 951308 (12 May 2015); doi: 10.1117/12.2178871
Proc. SPIE 9513, Multi petawatt laser design for the SHENGUANG II laser facility, 95130A (12 May 2015); doi: 10.1117/12.2178621
Proc. SPIE 9513, Timing jitter measurement and stabilization of a mode-locked ytterbium fiber laser, 95130B (12 May 2015); doi: 10.1117/12.2179043
Front Ends, Devices, Pump Sources
Proc. SPIE 9513, Industrial mJ-class all-fiber front end with spatially coherent top-hat beam output used as seeder for high power laser, 95130C (12 May 2015); doi: 10.1117/12.2178484
Proc. SPIE 9513, Reliable pump sources for high-energy class lasers, 95130E (12 May 2015); doi: 10.1117/12.2178020
Proc. SPIE 9513, AlGaInN laser diode bar and array technology for high power and individually addressable applications, 95130G (12 May 2015); doi: 10.1117/12.2081358
Proc. SPIE 9513, AOM optimization with ultra stable high power CO2 lasers for fast laser engraving, 95130H (12 May 2015); doi: 10.1117/12.2179040
Large Aperture Optics and Thermal Problems
Proc. SPIE 9513, Large aperture adaptive optics for intense lasers, 95130I (12 May 2015); doi: 10.1117/12.2178848
Proc. SPIE 9513, Alignment system for high-power large aperture laser systems, 95130J (12 May 2015); doi: 10.1117/12.2178479
Proc. SPIE 9513, High reflective diffraction grating for ultrafast pulse compression, 95130K (12 May 2015); doi: 10.1117/12.2185696
Proc. SPIE 9513, Thermally induced depolarization in the optical elements of the transition configuration: thick disks and short rods, 95130L (12 May 2015); doi: 10.1117/12.2178663
Novel Laser Materials
Proc. SPIE 9513, Yb:Lu2SiO5 crystal : characterization of the laser emission along the three dielectric axes, 95130O (12 May 2015); doi: 10.1117/12.2178604
Proc. SPIE 9513, Graded Yb:YAG ceramic structures: design, fabrication and characterization of the laser performances, 95130R (12 May 2015); doi: 10.1117/12.2178364
Proc. SPIE 9513, Investigation of Yb3+-doped alumino-silicate glasses for high energy class diode pumped solid state lasers, 95130S (12 May 2015); doi: 10.1117/12.2182067
Frequency Conversion
Proc. SPIE 9513, Multi-mJ, kHz picosecond deep UV source based on a frequency-quadrupled cryogenic Yb:YAG laser, 95130U (12 May 2015); doi: 10.1117/12.2179937
Proc. SPIE 9513, Picosesond pulses in deep ultraviolet produced by a 100 kHz solid-state thin disk laser, 95130V (12 May 2015); doi: 10.1117/12.2178491
Poster Session
Proc. SPIE 9513, Experimental benchmarking of the code for Yb:YAG multi-slab gas-cooled laser system operating at cryogenic temperatures, 95130X (12 May 2015); doi: 10.1117/12.2178395
Proc. SPIE 9513, Thermal distortion real-time detection and correction of a high-power laser beam-splitter mirror based on double Shack-Hartmann wavefront sensors, 95130Y (14 May 2015); doi: 10.1117/12.2176741
Proc. SPIE 9513, Wavelength-tunable erbium-doped fiber laser using silicon-on-insulator (SOI) based micro-ring with narrow laser linewidth, 95130Z (12 May 2015); doi: 10.1117/12.2177972
Proc. SPIE 9513, Active mode control of solid state laser using an intra-cavity beam shaper, 951310 (12 May 2015); doi: 10.1117/12.2178595
Proc. SPIE 9513, Temperature dependent absorption measurement of various transition metal doped laser materials, 951311 (12 May 2015); doi: 10.1117/12.2178608
Proc. SPIE 9513, Development of a mode-locked fiber laser system for a high finesse enhancement cavity, 951312 (12 May 2015); doi: 10.1117/12.2178619
Proc. SPIE 9513, Demonstration of an optical enhancement cavity with 10 micron wavelength, 951313 (12 May 2015); doi: 10.1117/12.2178623
Proc. SPIE 9513, Multiple pulses and harmonic mode locking from passive mode-locked Ytterbium doped fiber in anomalous dispersion region, 951314 (12 May 2015); doi: 10.1117/12.2178624
Proc. SPIE 9513, Sub-picosecond laser induced damage test facility for petawatt reflective optical components characterizations, 951316 (12 May 2015); doi: 10.1117/12.2178734
Proc. SPIE 9513, Generation of 1.6 ns Q-switched pulses based on Yb:YAG/Cr:YAG microchip laser, 951317 (12 May 2015); doi: 10.1117/12.2178833
Proc. SPIE 9513, Research on thermal effects of beam-splitter mirror in high-power laser system, 951318 (12 May 2015); doi: 10.1117/12.2179234
Proc. SPIE 9513, Different mode-locking methods in high energy all-normal dispersion Yb femtosecond all-fiber lasers, 951319 (12 May 2015); doi: 10.1117/12.2182273
Proc. SPIE 9513, An intra-cavity device with a discharge-drived CW DF chemical laser, 95131A (12 May 2015); doi: 10.1117/12.2177963
Back to Top