Front Matter: Volume 9738
Proc. SPIE 9738, Front Matter: Volume 9738, 973801 (15 March 2016); doi: 10.1117/12.2239308
LASE Plenary Session
Proc. SPIE 9738, Optical 3D Nano-fabrication: Drawing or Growing? (Conference Presentation), 973802 (); doi: 10.1117/12.2236681
Laser 3D Micro/Nano Structuring: Joint Session with Conferences 9735 and 9738
Proc. SPIE 9738, Improvement in contact resistance of 4H-SiC by excimer laser doping using silicon nitride films, 973803 (6 April 2016); doi: 10.1117/12.2212021
Proc. SPIE 9738, A cantilever based optical fiber acoustic sensor fabricated by femtosecond laser micromachining, 973804 (6 April 2016); doi: 10.1117/12.2213614
Laser Direct Writing: Joint Session with Conferences 9735 and 9738
Proc. SPIE 9738, Laser-assisted inkjet printing of highly viscous fluids with sub-nozzle resolution, 973805 (6 April 2016); doi: 10.1117/12.2210833
Proc. SPIE 9738, Laser printing and femtosecond laser structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries, 973806 (6 April 2016); doi: 10.1117/12.2211546
3D Laser Structuring Devices and Lithography III: Joint Session with Conferences 9738 and 9759
Proc. SPIE 9738, Precise 3D printing of micro/nanostructures using highly conductive carbon nanotube-thiol-acrylate composites, 973808 (6 April 2016); doi: 10.1117/12.2214862
Proc. SPIE 9738, Potential for GPC-based laser direct writing, 973809 (6 April 2016); doi: 10.1117/12.2217573
3D Laser Structuring Devices and Lithography IV: Joint Session with Conferences 9738 and 9759
Proc. SPIE 9738, 3D light robotics, 97380A (6 April 2016); doi: 10.1117/12.2217404
Proc. SPIE 9738, Advanced two-photon photolithography for patterning of transparent, electrically conductive ionic liquid-polymer nanostructures, 97380C (6 April 2016); doi: 10.1117/12.2218272
Laser Induced Forward Transfer (LIFT)
Proc. SPIE 9738, Laser printing of 3D metallic interconnects, 97380I (6 April 2016); doi: 10.1117/12.2213646
Materials, Processes, and Post-Printing Processes for Additive Manufacturing
Proc. SPIE 9738, 3D manufacturing of micro and nano-architected materials, 97380K (6 April 2016); doi: 10.1117/12.2217910
Proc. SPIE 9738, Review on laser powder injection additive manufacturing of novel alloys and composites, 97380O (6 April 2016); doi: 10.1117/12.2217909
Modeling, Design, Process Monitoring, and Controls for Additive Manufacturing
Proc. SPIE 9738, Towards in-situ process monitoring in selective laser sintering using optical coherence tomography, 97380Q (6 April 2016); doi: 10.1117/12.2210992
Proc. SPIE 9738, Sensing for directed energy deposition and powder bed fusion additive manufacturing at Penn State University, 97380R (6 April 2016); doi: 10.1117/12.2217855
Proc. SPIE 9738, Optical design and initial results from NIST's AMMT/TEMPS facility, 97380S (9 May 2016); doi: 10.1117/12.2214246
Proc. SPIE 9738, Towards photo-induced swimming: actuation of liquid crystalline elastomer in water, 97380T (6 April 2016); doi: 10.1117/12.2219855
SLM, DMLS, SLS, SLM with Ultrafast Lasers
Proc. SPIE 9738, Femtosecond fiber laser additive manufacturing of tungsten, 97380U (6 April 2016); doi: 10.1117/12.2217551
Proc. SPIE 9738, Laser post-processing of Inconel 625 made by selective laser melting, 97380W (6 April 2016); doi: 10.1117/12.2213745
Proc. SPIE 9738, Fabrication and heat treatment of high strength Al-Cu-Mg alloy processed using selective laser melting, 97380X (6 April 2016); doi: 10.1117/12.2211362
Applications, Systems, Process Developments for Additive Manufacturing I
Proc. SPIE 9738, Additive manufacturing of glass for optical applications, 97380Y (6 April 2016); doi: 10.1117/12.2218137
Proc. SPIE 9738, Reducing residual stresses and deformations in selective laser melting through multi-level multi-scale optimization of cellular scanning strategy, 97380Z (6 April 2016); doi: 10.1117/12.2212490
Proc. SPIE 9738, Application of laser ultrasonic non-destructive evaluation technique to additive manufacturing, 973810 (6 April 2016); doi: 10.1117/12.2219866
Proc. SPIE 9738, Repurposing mainstream CNC machine tools for laser-based additive manufacturing, 973811 (6 April 2016); doi: 10.1117/12.2217901
Applications, Systems, Process Developments for Additive Manufacturing II
Proc. SPIE 9738, X-band printed phased array antennas using high-performance CNT/ion gel/Ag transistors, 973813 (9 May 2016); doi: 10.1117/12.2219854
Proc. SPIE 9738, The application of digital medical 3D printing technology on tumor operation, 973816 (6 April 2016); doi: 10.1117/12.2209252
Poster Session
Proc. SPIE 9738, Experiments for practical education in process parameter optimization for selective laser sintering to increase workpiece quality, 973817 (6 April 2016); doi: 10.1117/12.2209562
Proc. SPIE 9738, Improving accuracy of overhanging structures for selective laser melting through reliability characterization of single track formation on thick powder beds, 97381B (6 April 2016); doi: 10.1117/12.2212621
Proc. SPIE 9738, Experimental study on Ti alloy plate fabrication by vacuum selective laser melting, 97381C (6 April 2016); doi: 10.1117/12.2212654
Back to Top