15 January 1976 Metal Optics For A Visible Infrared Spin-Scan Radiometer (VISSR)
Author Affiliations +
Proceedings Volume 0065, Design, Manufacture and Application of Metal Optics; (1976); doi: 10.1117/12.954518
Event: 19th Annual Technical Symposium, 1975, San Diego, United States
Abstract
A three-mirror electroless nickel- slated beryllium optical system is described which is used as the collecting telescope for the Visible Infrared Spin-Scan Radiometer (VISSR). The 16-inch diameter aper-ture, 114.7-inch focal length system is comprised of a flat, elliptically-shaped object-space scan mirror and a Ritchey-Chretien primary-secondary mirror pair. Hot pressed beryllium is used as the substrate material because of its light weight, structural rigidity, and thermal stability. Specific selection criteria include precision elastic limit (PEL), homogeneity, and isotropy. PEL is measured mechanically. Homo geneity and freedom from voids and inclusions are ensured by X-ray inspection. Anisotropy is evaluated from thermal expansion coefficients measured along three perpendicular axes. The scan mirror uses a structure of hollow triangular ribs to provide maximum strength and rigidity with minimum weight. The primary and secondary mirrors are three-point tangent bar mounted. All mirrors are plated with low-stres s electroless nickel. Phosphorus content analysis is used as a low stress indicator. Maximum plating stress levels are specified and are calculated from test strip measurements. Reflective surfaces are optically figured and coated with evaporated aluminum overcoated with silicon oxide. The finished system is designed for near diffraction limited performance in the visible.
© (1976) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John C. Campbell, "Metal Optics For A Visible Infrared Spin-Scan Radiometer (VISSR)", Proc. SPIE 0065, Design, Manufacture and Application of Metal Optics, (15 January 1976); doi: 10.1117/12.954518; https://doi.org/10.1117/12.954518
PROCEEDINGS
6 PAGES


SHARE
KEYWORDS
Mirrors

Radiometry

Beryllium

Infrared radiation

Visible radiation

Surface finishing

Metal optics

RELATED CONTENT

Thermal Effects On Beryllium Mirrors
Proceedings of SPIE (October 26 1989)
Use of beryllium for the VLT secondary mirror
Proceedings of SPIE (November 11 1996)
Substrate Throughprint In Low Scatter Mirrors
Proceedings of SPIE (January 15 1976)
System And Production Engineering Of A Beryllium Optic
Proceedings of SPIE (March 01 1974)
The limits of classical beam theory for bent strip residual...
Proceedings of SPIE (September 17 2007)

Back to Top