Translator Disclaimer
10 January 1977 Digital Techniques In High Resolution Analog Scanning And Recording
Author Affiliations +
A flat bed laser plate-maker system is being developed for Dow Jones and Company, publishers of the Wall Street Journal, to scan paste-ups and proofs and to reproduce the scanned information remotely on film or plates. Throughput of about one minute per plate is achieved. Presently, the fastest and most advanced way for producing newspaper printing plates is by preparing paste-ups and photographing each fully assembled page. Moreover, when transmission to a remote location is needed, telefax or more simply, "fax" transmission is used. Now, a flat bed laser plate-making system can eliminate the initial photographic step, improve the operational steps and, at the same time, speed up the whole process. In the laser system, the paste-up is scanned directly (without the photographic step) by a recently demonstrated flat field scanning system. Photomultiplier tubes change the reflected laser energy to an electrical signal which is digitized and transmitted to a second laser system, much like the first, where a second laser beam exposes a sensitive sheet of film or a coated plate to form the received image with great detail and quality. Most of the data processing takes place in digital domain. Scanning, transmission and recording take place in less time than is presently needed for fax operation alone.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heino Ristlaid Dest Data Corporation "Digital Techniques In High Resolution Analog Scanning And Recording", Proc. SPIE 0084, Laser Scanning Components and Techniques: Design Considerations/Trends, (10 January 1977);


Resonant Scanner Linearization Techniques
Proceedings of SPIE (November 27 1984)
CCD-based POSTNET bar-code reader
Proceedings of SPIE (December 22 1995)
Low-power SXGA active matrix OLED
Proceedings of SPIE (May 06 2009)
Digital Scan Conversion For A 3 TO 5 Micrometer Flir...
Proceedings of SPIE (November 09 1977)

Back to Top