9 November 1977 Digital Scan Conversion For A 3 TO 5 Micrometer Flir System
Author Affiliations +
Abstract
Display flicker has been an inherent characteristic of 3 to 5 micron lead selenide Forward Looking Infrared (FLIR) systems because the detector time constant ultimately limits the mechanical scan rate. In some systems, flicker has been reduced by increasing the frame rate from 15 to 30 frames per second (FPS); however, objectionable flicker is still apparent at the display edges due to the triangular scan used. This paper presents a digital scan converter technique which produces a completely flicker free display while maintaining the 15 FPS mechanical scan system rate. The system also enables a stop-action mode of display.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. J. Corbett, T. J. Corbett, C. Gill, C. Gill, A. Lloyd, A. Lloyd, } "Digital Scan Conversion For A 3 TO 5 Micrometer Flir System", Proc. SPIE 0124, Modern Utilization of Infrared Technology III, (9 November 1977); doi: 10.1117/12.955859; https://doi.org/10.1117/12.955859
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Resonant Scanner Linearization Techniques
Proceedings of SPIE (November 27 1984)
CCD-based POSTNET bar-code reader
Proceedings of SPIE (December 22 1995)
Commercialization of Australian advanced infrared technology
Proceedings of SPIE (September 08 1995)
Low-power SXGA active matrix OLED
Proceedings of SPIE (May 06 2009)

Back to Top