28 December 1977 Optical Processing Operations In Synthetic-Aperture Radar Systems
Author Affiliations +
Proceedings Volume 0128, Effective Utilization of Optics in Radar Systems; (1977) https://doi.org/10.1117/12.955975
Event: Effect Utilization of Optics in Radar Systems, 1977, Huntsville, United States
Abstract
Sophisticated signal processing is used in synthetic-aperture radar (SAR) systems to yield radar imagery with fine spatial resolution. Coherent optics has played a critical role in SAR signal processing for two decades and continues at present as the standard by which other SAR signal processors are measured. The signal processing operations which are required in SAR systems include display of the signal spectrum, spatial filtering, pulse compression, and post-detection integration. Depending upon the configuration of the radar itself, these may be required as one-dimensional or two-dimensional operations. In an optical processor, they are com-bined with imaging steps to move the signal to various locations in the processor, at which points these operations are implemented. Laser-illuminated spheres, cylinders and combinations thereof perform the signal processing operations. The signal processing requirements of SAR system are reviewed in this paper, and the manner in which elementary coherent optical configurations can be employed to satisfy these requirements is illustrated.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Leonard J. Porcello, Leonard J. Porcello, } "Optical Processing Operations In Synthetic-Aperture Radar Systems", Proc. SPIE 0128, Effective Utilization of Optics in Radar Systems, (28 December 1977); doi: 10.1117/12.955975; https://doi.org/10.1117/12.955975
PROCEEDINGS
10 PAGES


SHARE
Back to Top