21 December 1978 LED Driver And Pin Diode Receiver ICs For Digital Fiber Optic Communications
Author Affiliations +
Abstract
LED driver and PIN diode receiver ICs have been developed for application in fiber optic communication systems. The LED driver provides a drive current adjustable from 25 to 150 mA in 25 mA incre-ments. The current is stabilized against changes in supply voltage and changes in the LED voltage drop due to temperature variations by an internal regulator. When coupled with a suitable PIN diode, the receiver amplifies signals as small as 250 nanoamps to TTL logic levels. The receiver IC includes automatic gain control circuitry that enables it to operate over a 36 db range of optical input signal. Both ICs operate with a single 5-volt supply. These ICs can be used with state-of-the-art fiber optic components to construct fiber optic communications links operating at data rates greater than 10 Mb/s with Manchester encoded data or 20 Mb/s with NRZ data.
© (1978) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ben R. Eimer, Ben R. Eimer, John J. Geddes, John J. Geddes, J.Robert Biard, J.Robert Biard, "LED Driver And Pin Diode Receiver ICs For Digital Fiber Optic Communications", Proc. SPIE 0150, Laser and Fiber Optics Communications, (21 December 1978); doi: 10.1117/12.956714; https://doi.org/10.1117/12.956714
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Data Links For Marine Control Systems
Proceedings of SPIE (February 12 1990)
The Development Of Long-Wavelength Optical Receivers
Proceedings of SPIE (August 14 1984)
Control And Monitor System Using Fiber Optics In A Blast...
Proceedings of SPIE (January 21 1982)
Optical design of a low cost fiber optic coupling device...
Proceedings of SPIE (January 14 1996)
Design Of A Passive Fiber Optic Data Bus For Shipboard...
Proceedings of SPIE (December 10 1982)

Back to Top