Translator Disclaimer
15 December 1978 Electro-Optics In Industrial Metrology
Author Affiliations +
The application of electro-optics to industrial metrology is discussed. Principles of operation and methods of implementation are illustrated by a detailed examination of two simple microprocessor-based gaging systems. One system measures the location an11 diameter of each of three fuel ports inside the bore of a diesel fuel injector barrel. The machine can handle any one of four different part numbers with an inspection cycle time of five seconds. The second system inspects and sorts precision springs. Features measured by the machine include spring rate, free length, and end squareness. The machine accommodates over 80 different springs and maintains a gross throughput of 1,000 pieces per hour.
© (1978) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert E. Bible and John R. DeAguiar "Electro-Optics In Industrial Metrology", Proc. SPIE 0153, Advances in Optical Metrology I, (15 December 1978);


Tiny incident light angle sensor
Proceedings of SPIE (May 16 2017)
Flexible measuring machine based on a double interferometer
Proceedings of SPIE (October 22 1993)
Underwater terrain mapping of dam stilling basins
Proceedings of SPIE (May 12 1995)
Automated Inspection Using Electro-Optics
Proceedings of SPIE (May 08 1971)
On-Line Color Measurement System For Steel Sheets
Proceedings of SPIE (October 23 1986)
Industrial photogrammetry: challenges and opportunities
Proceedings of SPIE (June 21 2011)

Back to Top