20 August 1979 Monolithic Surface Acoustic Wave (SAW) Charge Transfer Device And Its Applications
Author Affiliations +
Proceedings Volume 0178, Smart Sensors; (1979) https://doi.org/10.1117/12.957286
Event: Technical Symposium East, 1979, Washington, D.C., United States
Surface acoustic waves excited in a Si-SiO2-ZnO layered structure can produce a traveling electric field in the silicon substrate. Charges stored in the traveling potential wells can be transferred at high speed and density and with less complexity than conventional charge coupled devices. The monolithic structure under investigation for the SAW-charge transfer device consists of a silicon substrate, a thin silicon dioxide insulating layer on top of which a ZnO piezoelectric film is deposited by sputtering. The surface acoustic waves are excited by interdigital transducers. The signal charge is injected into traveling potential wells that travel with the velocity of sound. The presence of a thin shorting plate placed on the ZnO film, over the charge transfer region can enhance the acoustoelectric potential at the Si-SiO2 interface, thus resulting in a more efficient device. An 80 MHz, 2μ-second SAW-CCD has successfully been fabricated. An optical application utilizing such a structure is proposed. It can be used in place of a conventional interline transfer design. Surface acoustic waves are launched before the charges are transferred from the sensor region to the transport region.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. A. Papanicolaou, N. A. Papanicolaou, H. C. Lin, H. C. Lin, H. F. Benz, H. F. Benz, } "Monolithic Surface Acoustic Wave (SAW) Charge Transfer Device And Its Applications", Proc. SPIE 0178, Smart Sensors, (20 August 1979); doi: 10.1117/12.957286; https://doi.org/10.1117/12.957286


Back to Top