29 November 1979 Semi-Automatic Modulation Transfer Function (MTF) Tolerancing
Author Affiliations +
Abstract
MTF tolerancing has not been a practical tool in the past, due to prohibitively expensive computer costs, in combination with lens designer calculations that are both extensive and dull. The design and use of a new computer program is described to demonstrate that the majority of the drudgery and computation costs are no longer necessary. Given the nominal design and the spatial frequency of interest, the program automatically generates a default set of tolerances, using defined boundaries and compensators, and predicts fabricated MTF performance. The user can override any of the assumptions to easily tailor the MTF drop, constraints, and compensators to those most appropriate to the specific manufacturing process and end use intended. RMS wavefront error can be used instead of MTF if appropriate. Examples are provided including computer-generated tables that can be directly used by an optomechanical designer.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert S. Hilbert, Robert S. Hilbert, } "Semi-Automatic Modulation Transfer Function (MTF) Tolerancing", Proc. SPIE 0193, Optical Systems in Engineering I, (29 November 1979); doi: 10.1117/12.957869; https://doi.org/10.1117/12.957869
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Tolerance assignment for minimizing manufacturing cost
Proceedings of SPIE (September 09 2010)
A Statistical Approach To Lens Tolerancing
Proceedings of SPIE (December 01 1978)
A case study for cost-effective lens barrel design
Proceedings of SPIE (September 12 2011)
Optical Design For Manufacture
Proceedings of SPIE (June 13 1989)
Lens solutions which increase manufacturing yield
Proceedings of SPIE (September 09 2010)

Back to Top