5 September 1980 Ultrathick Photoresist Processing
Author Affiliations +
Diazo-type positive photoresists are commonly used for pattern replication by the integrated circuit industry in a thickness range ≈ O.3-3μm. We are using these same resists at thicknesses as great as 40 μm to form electroplating molds for the fabrication of micro-Fresnel zone plates. Difficulties are encountered when films thicker than l5-18μm are used for pattern replication. Most significant of these difficulties are: i) the occurance of bulk microfractures throughout the resist volume, ii) loss of UV sensitivity, and iii) sidewall taper in high aspect ratio structures. These difficulties, with the exception of the sidewall taper, can be overcome with appropriate resist processing schedules.
© (1980) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D . R . Ciarlo, D . R . Ciarlo, N . M. Ceglio, N . M. Ceglio, } "Ultrathick Photoresist Processing", Proc. SPIE 0221, Developments in Semiconductor Microlithography V, (5 September 1980); doi: 10.1117/12.958626; https://doi.org/10.1117/12.958626


Lithography of 180-nm design rule for 1-Gb DRAM
Proceedings of SPIE (June 28 1998)
Projection Printing Characterization
Proceedings of SPIE (August 07 1977)
Influence of resist baking on the pattern quality of thick...
Proceedings of SPIE (September 22 1996)
Numerical and experimental study on SU-8 UV photolithography
Proceedings of SPIE (November 13 2007)

Back to Top