16 July 1981 Computer Controlled Technique Factors In Diagnostic Radiology
Author Affiliations +
Proceedings Volume 0273, Application of Optical Instrumentation in Medicine IX; (1981) https://doi.org/10.1117/12.931796
Event: Application of Optical Instrumentation in Medicine, 1981, San Francisco, United States
Abstract
One of the objectives of quality control in diagnostic radiography is the ability to select the technique factors which will produce a desired optical density on the final radiograph. This density is a function of several variables. Among these are x-ray target material, target angle, kV and the voltage wave form, mAs, geometry, patient thickness, field size, properties of the scatter reduction devices and type of screen film systems and processing employed. These variables have been modelled into a computer program. The program calculates technique factors of kV and mAs to give a desired film density for a given set of the other parameters. Application of the results of the theoretical calculations to experimental studies utilizing phantoms resulted in an optical density within 9% of the expected value. Results of the theoretical and experi-mental studies have been presented. Possible application of computer control in diagnostic radiography will be discussed.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bhas K. Pillai, Bhas K. Pillai, Robert G. Waggener, Robert G. Waggener, William D. McDavid, William D. McDavid, } "Computer Controlled Technique Factors In Diagnostic Radiology", Proc. SPIE 0273, Application of Optical Instrumentation in Medicine IX, (16 July 1981); doi: 10.1117/12.931796; https://doi.org/10.1117/12.931796
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Sensitometry At Low X-Ray Energies
Proceedings of SPIE (July 16 1981)
Exposures To Patients From Radiological Procedures
Proceedings of SPIE (July 06 1979)
Digital Radiography
Proceedings of SPIE (August 18 1980)

Back to Top