Translator Disclaimer
26 April 1982 Design And Production Of Tellurium Optical Data Disks
Author Affiliations +
Abstract
The design of the two most common types of tellurium based optical data disks is discussed. A firs order merit function is defined. It is shown that a tellurium layer in the 100 to 150 A range maximizes this function in the case of a single absorbing layer on glass. If a so-called trilayer structure is used, a 20-fold improvement in the merit function can be obtained. Bit error rate is one of the most critical parameters to measure on the final product, yet there is little equipment which can handle it in a quantitative manner. In addition, storage condition standards need to be established to enable archivability to be defined and tested.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James D. Rancourt "Design And Production Of Tellurium Optical Data Disks", Proc. SPIE 0299, Advances in Laser Scanning Technology, (26 April 1982); https://doi.org/10.1117/12.932554
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top