Paper
4 November 1981 Conical Rotating Aperture Geometries In Digital Radiography
Stephen Rudin, Daniel R. Bednarek, Roland Wong
Author Affiliations +
Abstract
Applications of conical rotating aperture (RA) geometries to digital radiography are described. Two kinds of conical RA imaging systems are the conical scanning beam and the conical scanning grid assemblies. These assemblies comprise coaxial conical surface(s) the axis of which is collinear with the x-ray focal spot. This geometry allows accurate alignment and continuous focusing of the slits or the grid lines. Image receptors which use solid state photodiode arrays are described for each type of conical RA system: multiple linear arrays for the conical scanning beam assembly and multiple area arrays for the conical scanning grid assembly. The digital rotating-aperture systems combine the wide dynamic range characteristics of solid state detectors with the superior scatter-rejection advantages of scanned beam approaches. The high scanning-beam velocities attainable by the use of rotating apertures should make it possible to obtain digital images for those procedures such as chest radiography which require large fields of view and short exposure times.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen Rudin, Daniel R. Bednarek, and Roland Wong "Conical Rotating Aperture Geometries In Digital Radiography", Proc. SPIE 0314, Digital Radiography, (4 November 1981); https://doi.org/10.1117/12.933026
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Radiography

Receptors

Digital imaging

Imaging systems

X-rays

Photodiodes

Back to Top