Translator Disclaimer
3 May 1982 Introduction To Precision Machining Of Metal Optics
Author Affiliations +
Proceedings Volume 0315, Reflecting Optics for Synchrotron Radiation; (1982) https://doi.org/10.1117/12.933018
Event: 1981 Brookhaven Conferences, 1981, Upton, United States
Abstract
New technologies are continually being developed and applied to machine tools which improve the quality and c pability of single point machining. The development of the single cryst diamond tool and recent improvements in vibration control have made possible the generation of optical quality surface finishes. The marriage of this surface finish quality with the tool path Flexibility of numerical control machine tools makes feasible the fabrication of many needed optical components. These components could not be fabricated by conventional lapping and polishing because of inadequate figure control and high cost. This report is intended to familiarize the reader with the basic requirements necessary for machining precision optical components. In addition, a brief description of capabilities existing at this facility is presented.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Howard L. Gerth "Introduction To Precision Machining Of Metal Optics", Proc. SPIE 0315, Reflecting Optics for Synchrotron Radiation, (3 May 1982); https://doi.org/10.1117/12.933018
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Compact Air Bearing Beam Scanner: Production And Test
Proceedings of SPIE (October 25 1983)
Precision Machining and Polishing of Ferrous Materials
Proceedings of SPIE (December 08 1983)
Diamond Turning Large Optics
Proceedings of SPIE (December 15 1976)
Lathe For Generation Of Aspherical Surfaces Of Revolution
Proceedings of SPIE (December 08 1983)
Machinability Aspects Of Diamond-Turned Metal Optics
Proceedings of SPIE (January 14 1976)

Back to Top