Paper
4 November 1982 Manufacture Of Large Glass Honeycomb Mirrors
J. R. P. Angel, J. M. Hill
Author Affiliations +
Abstract
We have begun a program to develop very large lightweight mirrors needed for ground and space based astronomy. A rigid structure of honeycomb sandwiched between faceplates is formed of borosilicate glass by melting it into a complex mold. Thermal gradients in the glass that degrade the figure of thick borosilicate mirrors during use can be largely eliminated in a honeycomb structure, by internal ventilation (in air) or careful control of the radiation environment (in space). We anticipate that, when the seeing is good, ground based telescopes with honeycomb mirrors will give better images than those with solid mirrors. Even slight temperature differences in the air near a slowly eauilibrating solid mirror can significantly degrade the wavefront at a turbulent boundary. We discuss in this paper materials and techniques and the experience that has been gained making trial mirrors and test castings. Our future program calls for making a 1.8m blank that will be figured and tested in the MMT in 1983. After further experience with 3m blanks, we plan to build a large furnace to make mirror blanks up to 8m or even 10m diameter.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. R. P. Angel and J. M. Hill "Manufacture Of Large Glass Honeycomb Mirrors", Proc. SPIE 0332, Advanced Technology Optical Telescopes I, (4 November 1982); https://doi.org/10.1117/12.933533
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Glasses

Space telescopes

Telescopes

Borosilicate glass

Liquids

Solids

RELATED CONTENT


Back to Top