Paper
14 October 1983 Ka-band and Q-band Communication Amplifier
T. Best, E. Holmes, C. Ito, Y. C. Ngan
Author Affiliations +
Abstract
Two high power communication amplifiers operating in the Extremely High Frequency (EHF) spectrum are described. Both amplifiers are based on silicon double-drift IMPATT diodes for power generation. The first amplifier operates in the high gain, narrowband injection-locking mode and represents a first step toward low cost manufacturing of this type of amplifier. It is capable of 6.2 W and 31 dB gain at 36.79 GHz, with 250 MHz injection-locking bandwidth. The second amplifier operates in the low gain, wideband negative resistance mode in which there is no power output in the absence of an input signal. A state-of-the-art power output in excess of 3.5 W was achieved from 43.5 to 44.5 GHz with a nominal 3 dB gain. This amplifier is in its advanced development stage.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Best, E. Holmes, C. Ito, and Y. C. Ngan "Ka-band and Q-band Communication Amplifier", Proc. SPIE 0423, Millimeter Wave Technology II, (14 October 1983); https://doi.org/10.1117/12.936158
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Diodes

Waveguides

Ka band

Extremely high frequency

Resistance

Solid state physics

RELATED CONTENT

Uniplanar integrated Ka-band mixer
Proceedings of SPIE (December 01 1990)
Wideband gyro-TWT amplifier experiments
Proceedings of SPIE (November 30 2017)
Ka/Q Band IMPATT Amplifier Technology
Proceedings of SPIE (October 14 1983)
Recent Advances In Millimeter Wave IMPATT Sources
Proceedings of SPIE (October 22 1982)

Back to Top