26 October 1983 Digital Holography: Algorithms, E-Beam Lithography, And 3-D Display
Author Affiliations +
Computer Generated holograms offer a wide variety of applications, specifically in the synthesis and processing of real and synthetic images. In this paper we examine and demonstrate the major aspects of recording these holograms using an ejectron beam exposure system (MEBES). Holographic patterns stored in memory can be recorded directly onto an electron sensitive resist with a IX format, thus requiring no reduction techniques. The MEBES system can record holograms as large as 12 cm. by 12 cm. square with a resolution of 500 cycles per mm. without significant distortions. The amount of information required to record such a hologram can far exceed 15 gigabytes. But by the method presented this process can be divided into manageable parcels (260k bytes) which are then combined to form a large scale hologram. The end effect of this project was to demonstrate that computer generated binary holograms can be recorded using an electron beam exposure system (MEBES). The results of this technique have been modest but more important, offer a promising future.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jorge L. Freyer, Jorge L. Freyer, Robert J. Perlmutter, Robert J. Perlmutter, Joseph W. Goodman, Joseph W. Goodman, } "Digital Holography: Algorithms, E-Beam Lithography, And 3-D Display", Proc. SPIE 0437, Intl Conf on Computer-Generated Holography, (26 October 1983); doi: 10.1117/12.937128; https://doi.org/10.1117/12.937128

Back to Top