26 October 1983 Hybrid Time- And Space-Integration Method For Computer Holography
Author Affiliations +
A conceptually simple method for producing a hologram of a computer-specified object is to illuminate the photosensitive recording plate with a reference wave and trace out the object distribution with a point of light moved by a computer-controlled scanning system. The principal drawback is the poor signal-to-noise ratio (SNR) of the reconstructed object, because of bias buildup in the recording process. Two methods for improving reconstruction SNR are discussed in this paper: (1) maximizing the contrast of each fringe or zone-plate pattern exposing the hologram, and (2) recording intermediate holograms of portions of the object, which are then reconstructed for use in recording a final hologram of higher signal-to-bias ratio.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William T. Rhodes, William T. Rhodes, } "Hybrid Time- And Space-Integration Method For Computer Holography", Proc. SPIE 0437, Intl Conf on Computer-Generated Holography, (26 October 1983); doi: 10.1117/12.937135; https://doi.org/10.1117/12.937135


High-resolution computer-aided moire
Proceedings of SPIE (November 30 1991)
Acousto-Optical Methods For High Resolution Echography
Proceedings of SPIE (March 26 1985)
Effect of noise on photorefractive grating readout
Proceedings of SPIE (December 15 1992)
Reproducial properties of referenceless fractalograms
Proceedings of SPIE (November 30 1997)
Conjugate image plane correlator with holographic disk memory
Proceedings of SPIE (December 30 1996)
Wavelet analysis for holographic basis fring
Proceedings of SPIE (July 30 2002)

Back to Top