16 February 1984 Performance Monitoring Of A Computer Numerically Controlled (CNC) Lathe Using Pattern Recognition Techniques
Author Affiliations +
On-line monitoring of the cutting process in CNC lathe is desirable to ensure unattended fault-free operation in an automated environment. The state of the cutting tool is one of the most important parameters which characterises the cutting process. Direct monitoring of the cutting tool or workpiece is not feasible during machining. However several variables related to the state of the tool can be measured on-line. A novel monitoring technique is presented which uses cutting torque as the variable for on-line monitoring. A classifier is designed on the basis of the empirical relationship between cutting torque and flank wear. The empirical model required by the on-line classifier is established during an automated training cycle using machine vision for off-line direct inspection of the tool.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L K Daneshmend, L K Daneshmend, H A Pak, H A Pak, "Performance Monitoring Of A Computer Numerically Controlled (CNC) Lathe Using Pattern Recognition Techniques", Proc. SPIE 0449, Intelligent Robots: 3rd Intl Conf on Robot Vision and Sensory Controls, (16 February 1984); doi: 10.1117/12.939257; https://doi.org/10.1117/12.939257


Bottle inspector based on machine vision
Proceedings of SPIE (March 05 2013)
Industrial robot's vision systems
Proceedings of SPIE (March 03 2016)
Analyzing characteristics of hybrid rice seed
Proceedings of SPIE (March 29 2004)
Improved rotational matching of SIFT and SURF
Proceedings of SPIE (June 07 2012)

Back to Top