Paper
14 May 1984 Fabrication Of Electrode Structures On Very Large Electroluminescent Displays
Charles E. Mellor, John L Plumb, Lawrence L Hope, Mohammed I Abdalla
Author Affiliations +
Proceedings Volume 0457, Advances in Display Technology IV; (1984) https://doi.org/10.1117/12.939396
Event: 1984 Los Angeles Technical Symposium, 1984, Los Angeles, United States
Abstract
Fabrication issues for EL panels up to one meter square are discussed. Particular attention is given the problem of fabricating electrode structures of indium tin oxide and aluminum on the large panels. Experimental results of processing on panels up to 26 x 32 cm active area with 512 x 640 pixels, using transparent electrodes with sheet resistance of less than 10 ohms per square and metal electrodes with sheet resistance less than 1 ohm per square are discussed. Brightness variations due to electrode resistance are given, and brightness as a function of drive voltage is reported for the 512 x 640 geometry.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Charles E. Mellor, John L Plumb, Lawrence L Hope, and Mohammed I Abdalla "Fabrication Of Electrode Structures On Very Large Electroluminescent Displays", Proc. SPIE 0457, Advances in Display Technology IV, (14 May 1984); https://doi.org/10.1117/12.939396
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Resistance

Aluminum

Glasses

Display technology

Electroluminescence

Coating

RELATED CONTENT


Back to Top