8 February 1985 Beam Profiling In Gigawatt 1064-Nm Lasers Used In Research On Optical Materials At Livermore
Author Affiliations +
Abstract
Laser pulses with intensities ranging from 109-1011 watts/cm? are routinely used at Livermore to measure nonlinear properties of optical materials. The energy in each of these pulses is measured with an absorbing glass calorimeter. Both vidicon cameras and photographic emulsions are used to record the fluence distribution in laser beams. Pulse waveforms are recorded by a streak camera, or by a combination of a photodiode and an oscilloscope. This paper describes our procedures for using this data to determine the fluence and intensity for short duration laser pulses.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Milan, S. E. Peluso, "Beam Profiling In Gigawatt 1064-Nm Lasers Used In Research On Optical Materials At Livermore", Proc. SPIE 0499, Optical Radiation Measurements, (8 February 1985); doi: 10.1117/12.971073; https://doi.org/10.1117/12.971073
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Anaglyph videoanimations from oblique stereoimages
Proceedings of SPIE (March 04 2015)
An Automatic Method Of Real-Time Wavefront Analysis
Proceedings of SPIE (December 29 1978)
Optical rangefinding from image focus
Proceedings of SPIE (January 01 1990)
Hazards of reverse projection from hand-held cameras
Proceedings of SPIE (October 15 1993)

Back to Top